
AUTOONE 9006/HB4 LED Bulbs, 70000LM 1200% Ultra Bright, R...
$26.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam, Headlight Bulb Low Beam
Used for: Headlight Bulb High Beam and Low Beam
Used for: Back Up Light Bulb, Back Up Reverse Light Bulb
Used for: Brake Light Bulb, Tail Light Bulb Outer
Used for: License Plate Light Bulb
Used for: License Plate Light Bulb
Used for: Stepwell Light Bulb
Used for: Tail Light Bulb Inner
Used for: Turn Signal Light Bulb Front
Used for: Turn Signal Light Bulb Front
Used for: Turn Signal Light Bulb Rear
Used for: Dome Light Bulb, Interior Door Light Bulb, Map Light Bulb
Used for: Dome Light Bulb, Interior Door Light Bulb, Map Light Bulb
Used for: Trunk or Cargo Area Light
This 2020 Infiniti QX60 bulb size guide is designed to help you verify the correct replacement bulb by lighting position, so you can match the right part before you buy. Because the QX60 can use different lighting setups depending on trim, package, market, and body style, checking each location separately is the safest way to confirm fitment.
Use this page as a quick reference for exterior and interior bulbs on the 2020 Infiniti QX60, including headlights, brake lights, reverse lights, license plate lights, dome lights, and more. If you are replacing one bulb or planning a full lighting refresh, the position-based chart makes it easier to compare the installed bulb with the listed size.
For the best fit, always compare the bulb in your vehicle with the chart and note that trim and lighting package differences can change the correct application. Some 2020 Infiniti QX60 models use halogen-style bulb listings in certain positions, while others may be equipped with LED lighting or factory HID components such as D2S in specific headlight setups. If you are considering an aftermarket LED conversion, make sure the bulb base, polarity, beam pattern, and housing clearance are compatible with your QX60. Before ordering, it is smart to remove the installed bulb and verify the number printed on the base, since the same model year can have different fitments by market and equipment level.
The listed low beam bulb size for the 2020 Infiniti QX60 is 9005 on some applications, and D2S on others. Because fitment can vary by trim and lighting package, check the bulb currently installed in your vehicle before purchasing a replacement.
The listed high beam bulb size is 9005 on some applications. Some QX60 lighting configurations may differ, so it is best to confirm the installed bulb or compare your headlamp assembly with the chart before ordering.
The brake light bulb is listed as 7528 for the 2020 Infiniti QX60. If your vehicle has a different rear light package, verify the bulb in the socket before replacing it.
The rear turn signal bulb is listed as 7440 for the 2020 Infiniti QX60. This is a common fitment, but you should still confirm the exact bulb in your taillight assembly.
The front turn signal bulb is listed as 7444NA or 2357A, depending on the application. Since the QX60 can vary by market and trim, checking the original bulb is recommended.
The back up reverse light bulb is listed as 921, and the back up light bulb is also listed as 921. If one side is out, replace bulbs in pairs if you want even brightness and color.
The license plate light bulb is listed as 168 or 917 for the 2020 Infiniti QX60. Both sizes are commonly referenced for this position, so confirm the installed bulb if you want the closest match.
The dome light bulb and map light bulb are both listed as 194 or 7441. The same sizes also apply to the interior door light on this vehicle.
The glove box light bulb and vanity mirror light bulb are both listed as LED on this page. Since the exact factory LED module can vary, check the existing light assembly before replacing it.
The front fog light bulb is listed as 9006 LED. If you are upgrading from halogen to LED, make sure the replacement is compatible with the fog light housing and does not create glare.
The daytime running light bulb and parking light bulb are both listed as LED on this page. Because the QX60 may use different lighting packages, it is important to verify the exact setup on your vehicle.
Not always. The page lists tail light bulb, tail light bulb outer as 7528, and tail light bulb inner as 2825R. Since rear lamp design can vary by trim or market, confirm which section of the lamp you are replacing.
Yes, many owners do, but the bulb must match the socket, fit inside the housing, and work correctly with the vehicle’s electrical system. For best results, compare the original bulb, check for error-free operation, and make sure the beam pattern is suitable for the lamp location.