
SEALIGHT H10/9145/9140 LED Fog Light Bulbs, 6000K Xenon W...
$17.09
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam
Used for: Headlight Bulb Low Beam(with halogen headlights)
Used for: Headlight Bulb Low Beam(with HID headlights)
Used for: Back Up Reverse Light Bulb
Used for: Brake Light Bulb, Tail Light Bulb
Used for: License Plate Light Bulb
Used for: Parking Light Bulb, Side Marker Light Bulb Rear, Turn Signal Light Bulb Front, Turn Signal Light Bulb Rear
Used for: Side Marker Light Bulb Front
Used for: Stepwell Light Bulb
Used for: Ash Tray Light Bulb
Used for: Courtesy Light Bulb
Used for: Glove Box Light Bulb
Used for: Map Light Bulb
Used for: Trunk or Cargo Area Light
This 2010 Jeep Grand Cherokee bulb size page helps you verify the correct bulb by lighting position before you buy replacements. Whether you are changing a headlight, tail light, reverse light, or interior lamp, matching the bulb to the exact location is the safest way to avoid fitment mistakes.
The 2010 Jeep Grand Cherokee used different bulbs depending on trim, lighting package, and market, so the same vehicle may not use the same low beam setup on every version. Use this guide to compare each bulb location on your Jeep and confirm the right size for the front, rear, and cabin lights.
For the best fit, always compare the bulb listed here with the one already installed in your Jeep, especially if the vehicle has been modified or converted to aftermarket lighting. Trim and package differences can affect whether your Grand Cherokee uses halogen or HID low beams, and some lighting upgrades may change the required bulb type or connector style. If you are replacing bulbs with LED aftermarket options, check for polarity, depth, and heat management, since a bulb that fits physically may still need an adapter or resistor to work correctly. Before ordering, remove the old bulb and confirm the marking on the base whenever possible, since that is the most reliable way to verify fitment on a 2010 Jeep Grand Cherokee.
The low beam bulb size is 9006 on 2010 Jeep Grand Cherokee models equipped with halogen headlights.
The low beam bulb size is D1S on 2010 Jeep Grand Cherokee models equipped with HID headlights.
The high beam bulb size is 9005.
The front fog light bulb is listed as 9145 LED on this page.
The back up reverse light bulb size is 921.
The license plate light bulb size is 168.
Both the front turn signal and front parking light use 3157A.
The rear turn signal, brake light, and tail light bulbs are listed as 3157A for the turn signal and 3157R for the brake and tail light positions.
The front side marker light bulb size is 194NA.
The rear side marker light bulb size is 3157A.
The map light uses 578, the stepwell light uses 906, the glove box light uses 194, the courtesy light uses 2825, the trunk or cargo area light uses 214-2, and the ash tray light uses 161.
Yes. Trim and lighting package can vary by market and body style, so the exact bulb setup may differ between vehicles even within the same model year.
Yes. Checking the installed bulb is the best way to confirm fitment, especially if the vehicle has been converted, modified, or previously repaired with non-OE parts.