
PIAA 19615 9005 (HB3) Xtreme White Plus
$64.57
Buy on Amazon →
Used for: Headlight Bulb High Beam and Low Beam(with halogen headlights)
Used for: Headlight Bulb High Beam and Low Beam(with HID headlights)
Used for: Back Up Reverse Light Bulb
Used for: Brake Light Bulb(FE), Tail Light Bulb Outer
Used for: Daytime Running Light Bulb(FE, with halogen headlights), Turn Signal Light Bulb Rear(FE)
Used for: License Plate Light Bulb, Tail Light Bulb Inner
Used for: License Plate Light Bulb, Tail Light Bulb Inner
Used for: Side Marker Light Bulb Front, Side Marker Light Bulb Rear(FE)
Used for: Turn Signal Light Bulb Front, Turn Signal Light Bulb Rear(EX)
Used for: Dome Light Bulb, Trunk or Cargo Area Light
Used for: Map Light Bulb
Used for: Map Light Bulb
Used for: Vanity Mirror Light Bulb
This 2017 Kia Niro bulb size guide helps you verify the correct replacement bulb by lighting position, so you can match the right part before you buy. Because the Niro could be equipped with different lighting packages and trim combinations, the bulb size for one location may change depending on the vehicle.
Use this page to check common exterior and interior bulb fitments for the 2017 Kia Niro, including headlights, turn signals, brake lights, reverse lights, license plate lights, and cabin bulbs. The chart is organized by lamp location to make replacement faster and reduce the chance of ordering the wrong bulb.
Fitment can vary by trim, market, and body style, so always compare your vehicle’s actual lighting setup with the bulb chart before ordering. The 2017 Kia Niro may use halogen, LED, or HID headlight systems depending on configuration, and those setups do not share the same bulbs. If you are converting to aftermarket LED bulbs, make sure the bulb base, polarity, and physical clearance are compatible with the housing, and check for warning messages or hyperflash on turn signals. The safest approach is to confirm the installed bulb number on the old bulb itself whenever possible, especially for positions that can differ between FE, EX, and LED-headlight models.
It helps you identify the correct bulb size by lighting position, such as headlights, brake lights, turn signals, reverse lights, and interior lamps. That makes it easier to replace only the bulb you need for your specific 2017 Kia Niro setup.
No. Trim and lighting package differences can change the bulb type for several locations. For example, halogen headlight models, LED headlight models, HID headlight models, and FE versions may use different bulbs in the same lighting position.
The chart lists 9005 for the high beam and low beam headlight bulb on models with halogen headlights. Always confirm your headlight housing before purchasing, since other lighting packages use different bulbs.
The chart lists D8S for the high beam and low beam headlight bulb on models with HID headlights. This is a different setup from the halogen version, so the bulb is not interchangeable with 9005.
The front turn signal light bulb is listed as 7507. This applies to the front signal position shown in the chart, but you should still verify the installed bulb if your vehicle has been modified.
For EX models, the rear turn signal light bulb is listed as 7507. Other versions, including FE, may use a different bulb size for the rear signal.
The FE rear turn signal light bulb is listed as 7506. This is one of the trim-specific differences on the 2017 Kia Niro.
The back up reverse light bulb is listed as 921. If your reverse lamp is dim, replacing both sides together is often a good idea so the light output stays even.
The license plate light bulb sizes are listed as 168 and 917. These are common small wedge-style bulbs, but you should match the exact bulb already installed in your vehicle.
The chart includes map light bulbs as 194 and 7441, vanity mirror light bulbs as 6418, and dome light plus trunk or cargo area light bulbs as 6461. These cabin bulbs can vary by trim and equipment package.
The daytime running light bulb depends on the version of the vehicle. EX models with LED headlights use LED DRLs, while FE models with halogen headlights use 7506 for the daytime running light bulb.
Check the trim, headlight type, and the actual bulb installed in the socket if possible. Also confirm whether the bulb is for the front or rear of the vehicle, since some positions use different sizes depending on FE, EX, or lighting package.
Yes, but only if the LED bulb is compatible with the socket, housing depth, and electrical system. Some aftermarket LED conversions may require additional resistors or may not fit correctly in sealed housings, so test carefully before final installation.