
PIAA 18803 881 Xtreme White Plus
$66.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam and Low Beam
Used for: Back Up Reverse Light Bulb, Center High Mount Stop Light Bulb
Used for: Brake Light Bulb, Tail Light Bulb
Used for: License Plate Light Bulb, Parking Light Bulb
Used for: License Plate Light Bulb, Parking Light Bulb
Used for: Side Marker Light Bulb Front
Used for: Turn Signal Light Bulb Front, Turn Signal Light Bulb Rear
Used for: Dome Light Bulb
Used for: Map Light Bulb
Used for: Map Light Bulb
Used for: Trunk or Cargo Area Light
If you need bulb sizes for a 2009 Kia Rio, this page organizes the most common exterior and interior lighting positions in one place. It is designed to help you verify the correct bulb by location, so you can match the right fit for the headlight, brake light, parking light, license plate light, and other lamps on the car.
The 2009 Kia Rio can use different lighting setups depending on trim, market, and body style, so checking the bulb position matters more than guessing by the vehicle name alone. Use this guide to narrow down the correct bulb size for each light on your Rio before you buy replacements.
For best results, compare the bulb listed on this page with the one already installed in your vehicle, especially if your Rio has had previous repairs or aftermarket lighting changes. Trim and package differences can affect fitment, and halogen bulbs are not always interchangeable with LED upgrades without the proper resistor, adapter, or housing compatibility. If you are converting to LED, make sure the bulb base, polarity, and physical clearance are suitable for the lamp location. When in doubt, remove the old bulb and check its printed number before ordering, since that is the most reliable way to confirm fitment.
The headlight bulb listed for the 2009 Kia Rio is 9003 for both high beam and low beam applications on this page. Always confirm the exact headlight setup on your car, since lighting packages can vary by market and body style.
The brake light bulb listed is 1157R. This same bulb size is also shown for the tail light position on this page, so it is worth checking the lamp assembly before ordering replacements.
The rear turn signal bulb listed for the 2009 Kia Rio is 1156A. If your vehicle has been modified or uses a different regional setup, verify the installed bulb before purchase.
The front turn signal bulb listed is 1156A. This makes it easy to match the correct replacement by position rather than assuming the front and rear bulbs are the same in every trim.
The front fog light bulb listed is 881. Some Rio models may not have factory fog lights, so only use this size if your vehicle is equipped with that lamp.
The license plate light bulb sizes listed are 168 and 917. Either may appear depending on the exact lamp setup, so check the bulb already installed if you want the closest match.
The parking light bulb sizes listed are 168 and 917. These are common small wedge-style bulbs, but the exact fit can still depend on the trim and lighting package.
The front side marker light bulb listed is 168NA. This is a separate fitment from the standard 168 or 917 listings, so it is important to use the side marker position specifically.
The dome light bulb listed is DE3175. Interior bulb fitment can vary if the car has had previous repairs or aftermarket interior lighting installed.
The map light bulb sizes listed are 194 and 7441. Either may be shown depending on the exact lamp configuration, so checking the installed bulb is recommended before ordering.
The trunk or cargo area light bulb listed is 6418. If your Rio has a different cargo lamp setup, confirm the socket and bulb number before replacing it.
The center high mount stop light bulb listed is 921. This is the third brake light at the rear of the vehicle, and it should be checked separately from the main brake lamps.
Yes, many owners upgrade to LED bulbs, but fitment depends on the lamp location and the vehicle’s electrical setup. Some LED conversions may need polarity correction, resistors, or compatible housings to avoid flicker or warning issues.
Because the 2009 Kia Rio can vary by trim, market, and body style, the installed bulb is the best confirmation of fitment. A quick visual check helps avoid ordering the wrong size, especially for interior lights and small exterior bulbs.