Used for: Headlight Bulb High Beam
Used for: Headlight Bulb High Beam and Low Beam
Used for: Headlight Bulb Low Beam(Hatchback, with projector-type headlights)
Used for: Headlight Bulb Low Beam(Hatchback, without projector-type headlights)
Used for: Back Up Reverse Light Bulb, Center High Mount Stop Light Bulb
Used for: Brake Light Bulb(Hatchback, without projector-type headlights), Tail Light Bulb Outer
Used for: Daytime Running Light Bulb(EX, Sedan, without projector-type headlights), Parking Light Bulb(EX, Sedan, Compare to original - Option 1)
Used for: License Plate Light Bulb, Tail Light Bulb Inner(EX, Sedan)
Used for: License Plate Light Bulb, Tail Light Bulb Inner(EX, Sedan)
Used for: Side Marker Light Bulb Front
Used for: Side Marker Light Bulb Rear(Hatchback, without projector-type headlights)
Used for: Turn Signal Light Bulb Front(Compare to original - Option 1)
Used for: Turn Signal Light Bulb Front(Compare to original - Option 2), Turn Signal Light Bulb Rear
Used for: Dome Light Bulb
Used for: Glove Box Light Bulb, Trunk or Cargo Area Light
Used for: Map Light Bulb
Used for: Map Light Bulb
This page for the 2016 Kia Rio helps you verify bulb sizes by lighting position, so you can match the correct replacement before you buy. Because Rio trim, body style, and lighting package can vary, the bulb chart separates exterior and interior lamps to make fitment easier for hatchback and sedan models alike.
Use the listings here to check the exact bulb type for headlights, turn signals, brake lights, reverse lights, license plate lights, and cabin bulbs. The 2016 Kia Rio may use different bulbs depending on whether it has projector-type headlights, EX trim equipment, or a specific market package, so the position-based chart is the safest way to confirm the right part.
For best fitment, compare your vehicle’s trim and headlamp setup before ordering. Some 2016 Kia Rio applications use halogen bulbs, while others may be listed with LED or LED-style replacements, and aftermarket conversions can change what fits physically and electrically. If you are replacing a bulb that has already been changed once, check the installed bulb itself and the socket before purchase, since prior owner upgrades, non-original housings, or regional differences can affect the correct size.
Start with the lighting position on the chart, such as low beam, tail light, or license plate light, then match that position to your body style and trim. The 2016 Kia Rio uses different bulbs in different locations, so position matters more than a single universal bulb size.
No. Headlight fitment can vary by setup. Some listings show a 9003 bulb for high beam and low beam, while hatchback models with projector-type headlights may use H11B for low beam or H1 for high beam. Check your exact headlamp type before ordering.
Front turn signal fitment can vary. The chart lists 7507 for one front turn signal application and 2357A for another front turn signal application. Use the entry that matches your specific trim and lamp housing.
The rear turn signal bulb listed for this model is 7507. Always confirm the socket and lamp assembly if your car has been modified or if the bulb was previously replaced with a non-original type.
The back up reverse light bulb listed is 921. This is a common exterior bulb position, but it is still smart to verify the socket before buying replacements in pairs.
The license plate light bulb is listed as 168 or 917. Both sizes appear on the page for this position, so either may be referenced depending on the source or replacement style.
The map light bulb is listed as 194 or 7441, and the dome light bulb is listed as 6461. These are interior fitments, so check the lens and socket style if you are replacing the original factory bulbs.
Both the glove box light and the trunk or cargo area light are listed as 6418. If your Rio has one of these courtesy lights, this is the bulb size to check first.
Tail light fitment can differ by body style and lamp section. The chart lists Tail Light Bulb Outer as 1157R, Tail Light Bulb Inner for EX sedan as 168 or 917, and a hatchback LED tail light listing as well. Match the exact lamp position before ordering.
Yes. The page includes several LED-related listings, including center high mount stop light, tail light, parking light, brake light, daytime running light, and rear side marker applications. Make sure the LED replacement matches the original bulb position and housing.
Aftermarket LED conversions can change beam pattern, brightness, and fitment. Even if the bulb base fits, the lamp may not perform like the original halogen bulb, especially in reflector or projector housings. Check local rules and test the lights after installation.
Body style and trim can change the lamp design, which changes the bulb size. For example, hatchback listings include projector-type headlight and rear side marker variations, while sedan listings include EX-specific parking and daytime running light options.
