
AUTOONE 9006/HB4 LED Bulbs, 70000LM 1200% Ultra Bright, R...
$26.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam and Low Beam
Used for: Back Up Light Bulb
Used for: Brake Light Bulb
Used for: Daytime Running Light Bulb, Tail Light Bulb Inner
Used for: License Plate Light Bulb, Side Marker Light Bulb Front, Side Marker Light Bulb Rear
Used for: Parking Light Bulb, Turn Signal Light Bulb Front
Used for: Tail Light Bulb Outer
Used for: Turn Signal Light Bulb Rear
Used for: Dome Light Bulb, Trunk or Cargo Area Light
Used for: Vanity Mirror Light Bulb
This page covers bulb sizes for the 2020 Kia Sportage and is organized by lighting position so you can quickly verify the correct bulb before buying replacements. Because trim level, market, and lighting package can change the setup, it is best to match the bulb to the exact lamp location on your vehicle rather than relying on a single all-purpose listing.
For the 2020 Kia Sportage, the same bulb type may appear in more than one place, while other positions use different sizes for the front, rear, interior, and cargo areas. Use this guide to compare headlight, signal, brake, license plate, dome, and other bulbs by location and narrow down the right fit for your Sportage.
Fitment can vary between trims and body styles, especially when a vehicle uses halogen lighting in one package and LED or upgraded lighting in another. If your Sportage has an aftermarket conversion, a dealer-installed accessory, or a lighting package that differs from the standard setup, confirm the actual bulb in the housing before ordering. The safest approach is to check the installed bulb, compare the base and connector style, and make sure any replacement matches both the bulb number and the lamp position. This is especially important for headlight and fog light applications, where LED conversions and non-original parts can affect fit and beam pattern.
The bulb chart for this page lists 9005 for the headlight high beam and low beam position. Always confirm the exact lamp on your Sportage, since lighting equipment can vary by market and trim.
The license plate light bulb is listed as 2825. This is a common small exterior bulb, but it is still smart to compare the old bulb before replacing it.
The front side marker light bulb is listed as 2825. Front marker lamps can sometimes share a bulb type with other small exterior lights on the vehicle.
The rear side marker light bulb is listed as 2825. Check the housing carefully because rear lighting layouts can differ depending on trim and market.
The brake light bulb is listed as 7443. If your Sportage has a different lighting package, verify the bulb in the brake lamp assembly before purchasing.
The rear turn signal light bulb is listed as 1156A, and the outer tail light bulb is listed as 2357R. These are separate positions, so it helps to identify which lamp you are replacing.
The front turn signal light bulb is listed as 2357A. This same bulb number is also shown for the parking light position on this page.
The parking light bulb is listed as 2357A. If the parking light and front turn signal are in the same housing, make sure you are replacing the correct socket location.
Both the dome light bulb and the trunk or cargo area light are listed as 6461. Interior bulb layouts can vary, so check the lens and socket style before ordering.
The vanity mirror light bulb is listed as 6418. This is an interior bulb, and the exact access method can differ depending on trim and mirror design.
The back up light bulb is listed as 7506. If your vehicle has a different rear lamp package, confirm the bulb in the reverse light socket before replacing it.
The daytime running light bulb is listed as 7528, and the tail light bulb inner is also listed as 7528. These positions may not be equipped the same way on every trim, so verify the installed bulb first.
The front fog light bulb is listed as 9006 LED, noted as optional. Fog light equipment can vary a lot by trim and market, so check whether your Sportage is equipped with factory fog lamps before buying.
Match the bulb to the exact lighting position on the vehicle, then compare the old bulb’s number, base, and connector style. This is the best way to avoid mistakes when trims, packages, or previous repairs have changed the original setup.