
PIAA 19615 9005 (HB3) Xtreme White Plus
$64.57
Buy on Amazon →
Used for: Headlight Bulb High Beam
Used for: Headlight Bulb Low Beam(with halogen headlights)
Used for: Headlight Bulb Low Beam(with HID headlights)
Used for: Back Up Reverse Light Bulb
Used for: License Plate Light Bulb, Side Marker Light Bulb Rear, Courtesy Light Bulb
Used for: License Plate Light Bulb, Side Marker Light Bulb Rear, Courtesy Light Bulb
Used for: Parking Light Bulb, Side Marker Light Bulb Front
Used for: Turn Signal Light Bulb Front
Used for: Turn Signal Light Bulb Rear
Used for: Dome Light Bulb, Map Light Bulb, Trunk or Cargo Area Light
This page lists the bulb sizes for the 2008 Mazda CX-9 and helps you verify the correct bulb by lighting position before you buy replacements. Whether you are changing a headlight, a brake light, or an interior lamp, matching the bulb to the exact location is the easiest way to avoid ordering the wrong part.
The 2008 Mazda CX-9 uses different bulb types depending on the lamp position and, in some cases, the lighting package installed on the vehicle. Use this guide to compare the front, rear, and interior bulbs on your CX-9 so you can replace only what you need with confidence.
Fitment can vary by trim, market, and body style, so it is smart to confirm what is actually installed on your vehicle before purchasing. This is especially important for the low beams, since the 2008 Mazda CX-9 may use H11 bulbs with halogen headlights or D2S bulbs with HID headlights. If you are considering aftermarket LED or HID conversions, make sure the bulb base, housing space, and beam pattern are compatible with your CX-9. For the best results, check the old bulb or the headlamp assembly label before you order, especially for exterior lighting and any package-specific equipment.
The low beam bulb depends on the headlight type. With halogen headlights, the 2008 Mazda CX-9 uses H11 bulbs. With HID headlights, it uses D2S bulbs.
The high beam headlight bulb is 9005.
The front turn signal light bulb is 1156A.
The rear turn signal light bulb is 7440A.
The chart lists LED bulbs for the brake light and the center high mount stop light. Since the exact LED part number is not provided, check the installed bulb or the vehicle’s lamp assembly before ordering a replacement.
The tail light bulb is listed as LED. Because no exact bulb part number is given, verify the installed bulb or assembly details before purchasing.
The back up reverse light bulb is 7440.
The license plate light bulb is 2825 or 98.
The dome light, map light, and trunk or cargo area light all use DE3175 bulbs.
Both the front parking light and the front side marker light use 2827 bulbs.
The rear side marker light and courtesy light use 2825 or 98 bulbs.
Yes. Trim and lighting package can vary by market and body style, and that can affect the exact bulb setup. Always verify the bulb position and the installed bulb before buying replacements.
In many cases, yes, but fitment and beam pattern matter. Make sure the LED bulb matches the socket, fits inside the housing, and produces a safe beam pattern for the headlight or signal location.
Match the bulb to the exact lighting position on the vehicle, then compare it with the installed bulb or the owner’s manual. This is especially helpful for headlights, since halogen and HID versions use different low beam bulbs.