
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam and Low Beam
Used for: Back Up Reverse Light Bulb, Center High Mount Stop Light Bulb(Compare to original - Option 1)
Used for: Brake Light Bulb, Tail Light Bulb
Used for: License Plate Light Bulb, Map Light Bulb
Used for: License Plate Light Bulb, Map Light Bulb
Used for: Parking Light Bulb, Turn Signal Light Bulb Front
Used for: Side Marker Light Bulb Front, Side Marker Light Bulb Rear
Used for: Turn Signal Light Bulb Rear
Used for: Dome Light Bulb
Used for: Glove Box Light Bulb, Trunk or Cargo Area Light
This 2011 Nissan Sentra bulb size guide helps you verify the correct bulb for each lighting position on the car. Whether you are replacing a headlight, tail light, license plate bulb, or interior lamp, checking by location is the easiest way to avoid buying the wrong part.
Because trim and lighting packages can vary by market and body style, the bulb listed for one Sentra may not match every version. Use this page as a fitment reference for the 2011 Nissan Sentra and compare the bulb type to the one already installed before ordering.
For best results, confirm whether your Sentra uses halogen or LED replacement parts, especially for fog lights and center high mount stop light applications. Some owners choose aftermarket LED conversions for brighter output or longer life, but the bulb base and physical fit still need to match the housing. If you are unsure, remove the old bulb and compare it to the replacement before purchase, since trim differences and regional equipment can change the correct size.
The 2011 Nissan Sentra uses an H13 bulb for both the high beam and low beam headlight function.
Front fog light fitment is listed as H11 LED or H16 LED, depending on the vehicle’s lighting setup.
The brake light bulb is 3057R for the 2011 Nissan Sentra.
The tail light bulb is also 3057R on this Sentra.
The rear turn signal bulb is 3057.
The front turn signal bulb is 3457A, and the parking light bulb is also 3457A.
The license plate light uses either 168 or 917, depending on the exact lamp assembly.
The map light uses 168 or 917, while the dome light uses DE3175.
Both the glove box light and the trunk or cargo area light use 158 bulbs.
The back up reverse light bulb is 921.
Two fitment options are listed for the center high mount stop light: 921 for one configuration, and an LED option for another configuration.
The front side marker light bulb is 194NA, and the rear side marker light bulb is also 194NA.
Yes. Because trim level, body style, and market can affect fitment, it is smart to compare the installed bulb to the replacement before ordering.
Yes, many positions can be converted to LED, but the bulb base, size, and housing clearance must still match. Make sure the LED is compatible with the original socket and light function.