
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam and Low Beam
Used for: Back Up Reverse Light Bulb, Center High Mount Stop Light Bulb(Compare to original - Option 1)
Used for: Brake Light Bulb, Tail Light Bulb
Used for: License Plate Light Bulb, Map Light Bulb
Used for: License Plate Light Bulb, Map Light Bulb
Used for: Parking Light Bulb, Turn Signal Light Bulb Front
Used for: Side Marker Light Bulb Front, Side Marker Light Bulb Rear
Used for: Turn Signal Light Bulb Rear
Used for: Dome Light Bulb
Used for: Glove Box Light Bulb, Trunk or Cargo Area Light
If you are looking up bulb sizes for a 2012 Nissan Sentra, this page helps you verify the correct bulb by lighting position instead of guessing from the old bulb alone. The Sentra can use different bulbs depending on trim, lighting package, market, and body style, so checking the exact location is the safest way to match the right replacement.
Use this guide to confirm common exterior and interior bulb fitments for the 2012 Nissan Sentra, including headlights, tail lights, brake lights, turn signals, reverse lights, license plate lights, and cabin bulbs. It is a practical reference for quick replacement work and for comparing original-style bulbs with LED upgrades.
Fitment can vary on the 2012 Sentra, especially between trims and vehicles with different factory lighting packages, so it is smart to compare the installed bulb before buying. Halogen and LED bulbs are not always direct swaps, and some aftermarket LED conversions may need additional parts, resistors, or housings to work correctly. If you are replacing a bulb for the first time, remove the old one and confirm the base type, connector style, and physical length before ordering. That simple check can prevent mismatches and save time.
The listed headlight bulb for the 2012 Nissan Sentra is H13 for both high beam and low beam. Always confirm the installed bulb if your car has been modified or if a previous owner changed the lighting setup.
Front fog light fitment is listed as H11 LED or H16 LED. Because fog light setups can vary, check the existing bulb and housing before ordering a replacement or LED conversion.
The brake light bulb is listed as 3057R. This is a common dual-function style used in many rear lamp assemblies, so make sure you match the correct base and filament style.
The tail light bulb is listed as 3057R. If your rear lamp assembly combines multiple functions, verify which bulb controls the tail function before replacement.
The rear turn signal bulb is listed as 3057. Check the socket and lens function carefully, since the rear lamp assembly may share similar-looking bulbs for different lighting roles.
The front turn signal bulb is listed as 3457A, and the parking light bulb is also listed as 3457A. This makes it especially important to confirm which socket you are replacing so you do not mix up front lighting positions.
The back up reverse light bulb is listed as 921. If one reverse lamp is out, it is often a good idea to replace both sides at the same time for even brightness.
The license plate light bulb is listed as 168 or 917. Both are commonly used wedge-style bulbs, but you should still compare the old bulb to the listing before purchase.
The map light bulb is listed as 168 or 917, and the dome light bulb is listed as DE3175. Interior bulbs can differ by trim, so it helps to remove the lens and check the installed bulb directly.
The center high mount stop light has two listed options: one is 921, and the other is an LED compare-to-original option. Because the third brake light can vary, verify the installed bulb or assembly before ordering.
The front side marker bulb is listed as 194NA, and the rear side marker bulb is also listed as 194NA. These are small marker bulbs, so be careful not to confuse them with signal or parking light bulbs.
Yes, both the glove box light bulb and the trunk or cargo area light are listed as 158. If one interior utility light is out, checking both locations can help you keep the cabin lighting consistent.