Used for: Headlight Bulb High Beam
Used for: Headlight Bulb Low Beam
Used for: Back Up Reverse Light Bulb
Used for: License Plate Light Bulb
Used for: Side Marker Light Bulb Front
Used for: Turn Signal Light Bulb Front
Used for: Courtesy Light Bulb
Used for: Courtesy Light Bulb
Used for: Dome Light Bulb, Engine Compartment Light Bulb, Trunk or Cargo Area Light
Used for: Dome Light Bulb, Engine Compartment Light Bulb, Trunk or Cargo Area Light
Used for: Map Light Bulb
This 2010 Porsche 911 bulb size page is designed to help you verify the correct replacement bulb by lighting position, so you can match the right part to the right socket before you buy. Because Porsche used different lighting setups depending on trim, body style, and market, checking the exact lamp location is the safest way to avoid ordering the wrong bulb.
For the 2010 Porsche 911, this page covers exterior and interior lighting points such as the low beam, high beam, tail light, brake light, turn signal, side marker, license plate, reverse light, and cabin bulbs. Use the bulb chart to compare each position with the listed bulb type and confirm what your car uses before replacing anything.
Fitment can vary on the 2010 Porsche 911 based on trim, lighting package, and whether the car has factory halogen or LED equipment in a given position. Some owners also switch to aftermarket LED conversions, but those changes can affect beam pattern, warning messages, or compatibility with the original housing. Before ordering, it is smart to inspect the bulb currently installed in your car and compare it with the chart, since the same model year may use different bulbs in different markets or body styles.
The listed low beam headlight bulb for the 2010 Porsche 911 is D2S. This is the bulb type shown for the low beam position on this page.
The high beam headlight bulb listed for the 2010 Porsche 911 is H11. Always confirm the installed bulb before replacing it, especially if the car has been modified.
The front turn signal light bulb listed for the 2010 Porsche 911 is PH24WY. This is the bulb type shown for the front indicator position.
The rear turn signal light bulb is listed as LED on this page. Since the exact part number is not provided, use the chart and your vehicle’s existing setup to confirm the correct replacement.
Yes, the brake light bulb position is listed as LED. If your car already has factory LED brake lighting, replacement may involve the lamp assembly rather than a simple bulb swap.
The license plate light bulb listed for the 2010 Porsche 911 is 6418.
The map light bulb listed for the 2010 Porsche 911 is 2886X. Check both sides if your car has dual map lights.
Those positions are listed with 6411 and 6428 on this page. That means the same bulb family may apply to multiple interior and utility light locations, depending on the exact trim and housing.
The back up reverse light bulb listed for the 2010 Porsche 911 is 7506.
The front side marker light bulb listed for the 2010 Porsche 911 is 2821.
The courtesy light bulb is listed as 2825, 98. Either of those bulb references may appear in the chart for that position, so verify the one that matches your installed bulb and housing.
In some positions, yes, but fitment depends on the housing and the car’s electrical setup. LED upgrades can change brightness, color, and warning behavior, so it is best to confirm compatibility before buying.
