Used for: Headlight Bulb Low Beam
Used for: Back Up Reverse Light Bulb
Used for: License Plate Light Bulb
Used for: Side Marker Light Bulb Front
Used for: Stepwell Light Bulb, Dome Light Bulb, Engine Compartment Light Bulb, Glove Box Light Bulb, Map Light Bulb, Trunk or Cargo Area Light
Used for: Stepwell Light Bulb, Dome Light Bulb, Engine Compartment Light Bulb, Glove Box Light Bulb, Map Light Bulb, Trunk or Cargo Area Light
Used for: Turn Signal Light Bulb Front
This page covers bulb sizes for the 2011 Porsche Panamera and is organized by lighting position so you can quickly verify the correct fit before ordering replacements. Because Porsche used different lighting setups depending on trim, package, and market, checking the bulb location is the safest way to match the right part.
Use this guide to compare exterior and interior bulbs for the 2011 Panamera, including headlight, tail light, brake light, license plate, reverse, and cabin lighting. The goal is to make bulb replacement simpler by showing the size or bulb type associated with each position on the car.
Fitment can vary on the 2011 Porsche Panamera by trim level, lighting package, body style, and regional market, so always confirm the bulb already installed in your vehicle before buying replacements. Some positions use LED assemblies, while others use replaceable halogen-style bulbs such as D1S, 7506, 6418, 2825/98, 2821, or PH24WY. If you are considering aftermarket LED conversions, check for proper beam pattern, polarity, heat management, and warning messages, since not every retrofit works the same way as the factory setup. When possible, remove the old bulb and compare the base, connector, and markings before purchase to avoid returns and fitment issues.
The low beam headlight bulb is listed as D1S for the 2011 Porsche Panamera.
The front turn signal light bulb is listed as PH24WY.
The license plate light bulb is listed as 6418.
The back up reverse light bulb is listed as 7506.
The front side marker light bulb is listed as 2821.
The map light bulb, dome light bulb, glove box light bulb, trunk or cargo area light, stepwell light, and engine compartment light are all listed as 2825, 98.
Several rear exterior positions are listed as LED, including the center high mount stop light, brake light, parking light, tail light, daytime running light, rear turn signal light, and rear side marker light.
No. Some positions are listed only by bulb type, while others are shown as LED assemblies. If a part number is not explicitly provided, it should not be assumed.
Because trim and lighting package differences can change the correct fitment. Checking the installed bulb helps confirm the exact base and size before you buy.
Sometimes, but fitment and performance can vary. You should verify compatibility, warning behavior, and beam pattern before converting from halogen to LED.
Yes. The same year and model can use different lighting setups depending on trim, package, body style, and market, so the bulb chart should be used as a guide rather than a guess.
Identify the lighting position first, confirm the listed bulb type, then compare it to the bulb removed from the vehicle. That approach reduces the chance of ordering the wrong part.
