Used for: Headlight Bulb Low Beam
Used for: Back Up Reverse Light Bulb
Used for: License Plate Light Bulb
Used for: Side Marker Light Bulb Front
Used for: Stepwell Light Bulb, Dome Light Bulb, Engine Compartment Light Bulb, Glove Box Light Bulb, Map Light Bulb, Trunk or Cargo Area Light
Used for: Stepwell Light Bulb, Dome Light Bulb, Engine Compartment Light Bulb, Glove Box Light Bulb, Map Light Bulb, Trunk or Cargo Area Light
Used for: Turn Signal Light Bulb Front
This page covers the 2012 Porsche Panamera and helps you verify bulb sizes by lighting position, so you can match the correct replacement to each lamp on the car. Because Porsche used different lighting setups depending on market, trim, and body style, it is always smart to confirm the bulb type for the exact location before ordering.
For the 2012 Panamera, many exterior rear lighting functions use LED assemblies, while several interior and utility lamps use replaceable bulbs such as 2825/98, 2821, 6418, 7506, D1S, and PH24WY. Use the chart on this page to identify the right bulb for the headlight, tail light, license plate light, dome light, glove box light, and other positions without guessing.
Fitment can vary by trim package, lighting option, and regional specification, so two 2012 Porsche Panamera models may not use the same bulb in every position. Some exterior lights are factory LED units, while others may be halogen-style bulbs or part of an aftermarket conversion. If your car has been modified, or if a previous owner changed a lamp assembly, check the installed bulb before buying replacements. That is especially important for D1S low beams and for LED exterior lamps, since the bulb may be integrated into the housing rather than serviced as a simple plug-in bulb.
The listed low beam headlight bulb is D1S. This is the bulb type shown for the 2012 Porsche Panamera on this page.
The front turn signal bulb is listed as PH24WY. Always verify the exact lamp setup on your car before ordering.
The rear turn signal light is shown as LED on this page. In many cases, that means the lamp is part of an LED assembly rather than a standard replaceable bulb.
Yes. The brake light bulb is listed as LED for this model year.
The license plate light bulb is listed as 6418 for the 2012 Porsche Panamera.
The back up reverse light bulb is listed as 7506.
The front side marker light bulb is listed as 2821.
The glove box light bulb is listed as 2825, 98.
The chart shows 2825, 98 for the glove box light, trunk or cargo area light, dome light, map light, stepwell light, and engine compartment light.
The tail light bulb is listed as LED. Depending on the exact housing, that may mean the light is not serviced like a traditional bulb and may be part of an LED unit.
Not always. Trim level, lighting package, market, and body style can change the bulb setup, so it is best to match your specific vehicle and lamp position.
Yes. Checking the installed bulb is one of the best ways to confirm fitment, especially if the car has aftermarket parts, prior repairs, or a swapped lighting assembly.
