
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front(with eyesight package (steering responsive fog))
Used for: Fog Light Bulb Front(with eyesight package (steering responsive fog))
Used for: Headlight Bulb High Beam, Daytime Running Light Bulb(with halogen headlights)
Used for: Headlight Bulb Low Beam
Used for: Back Up Reverse Light Bulb
Used for: License Plate Light Bulb, Tail Light Bulb
Used for: Parking Light Bulb(with halogen headlights), Turn Signal Light Bulb Front
Used for: Side Marker Light Bulb Front, Side Marker Light Bulb Rear
Used for: Turn Signal Light Bulb Rear
Used for: Dome Light Bulb, Map Light Bulb
Used for: Trunk or Cargo Area Light
This page helps you verify the bulb sizes for the 2019 Subaru Crosstrek by lighting position, so you can match the correct replacement to the exact lamp you need. Whether you are changing a headlight, tail light, interior light, or license plate light, checking the bulb chart by location makes it easier to avoid ordering the wrong part.
The 2019 Subaru Crosstrek uses different bulb types depending on trim, lighting package, and sometimes market or body style. Some versions use LED assemblies in certain positions, while other versions use replaceable halogen bulbs such as 9005, H11, 7444NA, 7440A, 168, DE3175, and DE3022. Use the position-specific listings below to confirm fitment before you buy.
Fitment can vary a lot on this model, especially between halogen and LED headlight setups and between standard and package-equipped vehicles. If your Crosstrek has LED headlights, some forward lighting positions may be part of an LED assembly rather than a simple replaceable bulb, while halogen-equipped models use separate bulbs for the high beam, low beam, DRL, and parking light functions. Aftermarket LED conversions can also change beam pattern, brightness, and connector compatibility, so it is smart to compare the installed bulb and connector style before ordering. If possible, remove the old bulb first and check the markings on the base, since that is the most reliable way to confirm the correct replacement.
The low beam headlight bulb is H11 on halogen-equipped 2019 Subaru Crosstrek models.
The high beam headlight bulb is 9005 on halogen-equipped models.
Some LED headlight listings are shown as a combined LED headlight setup rather than separate replaceable high beam and low beam bulbs. On those versions, the lighting may be part of an LED assembly instead of a standard bulb swap.
The daytime running light bulb is 9005 on halogen headlight models.
The parking light bulb is 7444NA on halogen headlight models.
The front turn signal light bulb is 7444NA.
The rear turn signal light bulb is 7440A.
The license plate light bulb is 168.
The tail light bulb is 168.
The front side marker light bulb is 168NA, and the rear side marker light bulb is also 168NA.
Both the dome light and map light use DE3175 bulbs.
The trunk or cargo area light uses a DE3022 bulb.
The back up reverse light bulb is 7440.
That setup uses H11 LED or H16 LED, depending on the exact lighting configuration listed for the vehicle.
Yes. Trim, lighting package, and market differences can affect fitment, so checking the bulb already installed in your Crosstrek is the safest way to confirm the correct size.