Used for: Headlight Bulb Low Beam
Used for: Back Up Reverse Light Bulb, Turn Signal Light Bulb Rear
Used for: Brake Light Bulb, Tail Light Bulb
Used for: Center High Mount Stop Light Bulb
Used for: License Plate Light Bulb, Courtesy Light Bulb(Compare to original - Option 2), Glove Box Light Bulb, Trunk or Cargo Area Light, Vanity Mirror Light Bulb
Used for: Parking Light Bulb
Used for: Side Marker Light Bulb Front, Turn Signal Light Bulb Front Inner
Used for: Side Marker Light Bulb Rear, Stepwell Light Bulb, Courtesy Light Bulb(Compare to original - Option 1), Interior Door Light Bulb
Used for: Side Marker Light Bulb Rear, Stepwell Light Bulb, Courtesy Light Bulb(Compare to original - Option 1), Interior Door Light Bulb
Used for: Turn Signal Light Bulb Front Outer
Used for: Dome Light Bulb, Engine Compartment Light Bulb
Used for: Dome Light Bulb, Engine Compartment Light Bulb
Used for: Map Light Bulb
This 2000 Audi A4 bulb size guide helps you quickly verify the correct bulbs by lighting position, so you can match the right part before you buy. Whether you are replacing a burned-out interior lamp or checking exterior lighting, this page organizes the common fitments for the A4 in a simple, model-year format.
Use the chart to compare bulb sizes for the headlamps, tail lamps, parking lights, license plate lights, and cabin lights on your 2000 Audi A4. Because lighting equipment can vary by trim, market, and body style, it is always smart to confirm the bulb location first and then match the size listed for that position.
Fitment can change depending on trim level, lighting package, and whether the car uses halogen or HID equipment, so the same 2000 Audi A4 may not use identical bulbs in every market. If you are considering LED replacements or other aftermarket conversions, make sure the bulb style, socket depth, and polarity requirements are compatible with the housing. For the best results, check the installed bulb before ordering, especially for interior lights and any exterior lamp that may have been changed previously.
The low beam headlight bulb listed for the 2000 Audi A4 is D2S. This is the key bulb to verify if your car is equipped with the factory HID-style low beam setup.
The front outer turn signal bulb is 2827 on the 2000 Audi A4. Always confirm the socket and lens position before replacing it.
The front side marker light bulb is 3457A. This bulb is used in the front side marker position on the 2000 Audi A4.
The rear turn signal bulb listed for this model year is 7506. If one rear signal is out, replace it with the same bulb size on that side.
The back up reverse light bulb is 7506 on the 2000 Audi A4. That makes it the same bulb size as the rear turn signal in the chart.
Both the brake light bulb and the tail light bulb are listed as 7528 for the 2000 Audi A4. This is helpful when checking rear lamp service parts.
The center high mount stop light bulb is 2723. If the third brake light is dim or out, this is the size to check first.
Several interior positions use 2825 or 98, including the interior door light, stepwell light, side marker light rear, and one courtesy light option. Another courtesy light option is listed as 6418, so confirm the exact lamp location before ordering.
The dome light bulb and engine compartment light bulb are listed as 6411 or 6428. These two positions share the same bulb sizes in the chart.
The license plate light bulb is 6418 on the 2000 Audi A4. This is a common exterior bulb size, so it is worth checking the installed bulb if the housing has been modified.
The glove box light bulb, vanity mirror light bulb, and trunk or cargo area light are all listed as 6418. That same size also appears for one courtesy light option.
The parking light bulb is 64132 for the 2000 Audi A4. If the parking lights are not working, verify both the bulb and the socket condition.
Yes. The map light bulb is listed as 64111, and it is marked optional in the raw list. If your car has map lights, check the installed bulb before purchasing replacements.
Because the 2000 Audi A4 can have trim and lighting package differences by market and body style, the same bulb type may not apply to every position. Matching the bulb by location is the safest way to avoid ordering the wrong part.
