
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam and Low Beam
Used for: Back Up Reverse Light Bulb
Used for: Brake Light Bulb(with halogen headlights), Tail Light Bulb(with halogen headlights)
Used for: License Plate Light Bulb, Vanity Mirror Light Bulb
Used for: Side Marker Light Bulb Front, Glove Box Light Bulb, Interior Door Light Bulb, Map Light Bulb, Trunk or Cargo Area Light
Used for: Side Marker Light Bulb Front, Glove Box Light Bulb, Interior Door Light Bulb, Map Light Bulb, Trunk or Cargo Area Light
Used for: Turn Signal Light Bulb Front
Used for: Turn Signal Light Bulb Rear
Used for: Dome Light Bulb
Used for: Dome Light Bulb
This 2010 Audi A4 bulb size guide helps you verify the correct bulb by lighting position, so you can replace a failed lamp with the right fit the first time. Because Audi used different lighting setups depending on trim, body style, and market, checking the exact location on the car is the safest way to match the bulb.
Use this page as a quick reference for exterior and interior bulbs on the 2010 Audi A4, including headlights, tail lights, brake lights, reverse lights, license plate lights, and cabin lamps. It is especially useful when you want to compare halogen and HID-equipped models, or when you are shopping for LED replacement bulbs.
Fitment on the 2010 Audi A4 can vary by trim package, lighting option, and whether the car has halogen or HID headlights, so always confirm the installed bulb before buying. Some positions use different bulb types on halogen and HID versions, and aftermarket LED conversions may need the correct base, polarity, or additional hardware to work properly. If a bulb is hard to identify from the chart alone, remove the old bulb and compare it before ordering, especially for exterior lamps that may have been changed by a previous owner.
It covers common bulb locations on the 2010 Audi A4, including headlights, fog lights, daytime running lights, tail lights, brake lights, reverse lights, plate lights, dome lights, map lights, glove box lights, trunk lights, vanity mirror lights, and other interior or exterior positions.
The 2010 Audi A4 uses different rear lamp bulb types depending on whether the car has halogen headlights or HID headlights. That means the same lighting position may use one bulb on one version and a different bulb on another, so headlight type matters when checking fitment.
The headlight bulb for both high beam and low beam on the HID-equipped 2010 Audi A4 is D3S. If your car is not HID-equipped, the bulb setup may differ, so confirm your headlight package before ordering.
The front turn signal light bulb listed for the 2010 Audi A4 is 12272NA.
The rear turn signal light bulb listed for the 2010 Audi A4 is 7506.
The back up reverse light bulb listed for the 2010 Audi A4 is 921.
For 2010 Audi A4 models with halogen headlights, the brake light bulb and tail light bulb are listed as 7506R.
For 2010 Audi A4 models with HID headlights, the brake light bulb and tail light bulb are listed as LED. Because the listing does not provide a specific part number, it is best to match the bulb type by position rather than assume a universal replacement.
The front fog light bulb listing for the 2010 Audi A4 shows H11 LED and H16 LED. The correct choice can depend on the exact trim or lighting package, so verify the installed bulb before purchase.
The license plate light bulb and the vanity mirror light bulb are both listed as 6418 for the 2010 Audi A4.
Several interior positions use 2825 or 98, including the glove box light, trunk or cargo area light, map light, interior door light, side marker light front, and stepwell light. The dome light bulb is listed as 6411 or 6428.
Yes, many positions on the 2010 Audi A4 can be upgraded to LED, but fitment depends on the socket, polarity, and whether the car already uses LED modules in that location. Exterior lighting conversions may also require error-free bulbs or resistors to avoid dash warnings or hyperflash.
Yes. Even with a year-specific bulb chart, checking the installed bulb is the best way to confirm fitment on a 2010 Audi A4. This is especially important if the car has been modified, has a different market specification, or has had bulbs replaced with aftermarket parts.