
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam and Low Beam
Used for: Back Up Reverse Light Bulb
Used for: Brake Light Bulb, Tail Light Bulb
Used for: License Plate Light Bulb, Dome Light Bulb, Vanity Mirror Light Bulb
Used for: Side Marker Light Bulb Front, Interior Door Light Bulb, Map Light Bulb, Trunk or Cargo Area Light
Used for: Side Marker Light Bulb Front, Interior Door Light Bulb, Map Light Bulb, Trunk or Cargo Area Light
Used for: Side Marker Light Bulb Rear, Glove Box Light Bulb
Used for: Turn Signal Light Bulb Front
Used for: Turn Signal Light Bulb Rear
This 2012 Audi Q5 bulb size page helps you verify the correct bulbs by lighting position, so you can replace only the part you need. Whether you are changing a headlight, interior lamp, or rear signal bulb, matching the bulb to the exact location is the easiest way to avoid fitment mistakes.
The 2012 Audi Q5 uses a mix of LED and halogen-style bulbs depending on the lamp and equipment level. Because trim and lighting package can vary by market and body style, always compare the bulb chart on this page with the bulb already installed in your vehicle before ordering replacements.
For best results, confirm your Q5’s trim, lighting package, and whether the lamp is factory halogen or LED before buying. Some positions may accept more than one bulb type or have different specifications for different markets, and aftermarket LED conversions can change the required fitment or trigger warning messages. If you are unsure, remove the old bulb and match the base, shape, and markings before purchase, especially for exterior lights where the wrong bulb can affect brightness, beam pattern, or legal compliance.
The listed headlight bulb for both high beam and low beam on the 2012 Audi Q5 is D3S. This is the key bulb to verify if your vehicle has the factory HID-style headlamp setup.
The front turn signal bulb is listed as 12272NA. Always check the existing bulb and housing style, since front lighting equipment can vary by trim or market.
The rear turn signal bulb is 7507. If your Q5 has been modified or fitted with aftermarket tail lamps, confirm the actual bulb before ordering.
The back-up reverse light bulb is 921. This is a common fitment, but it is still a good idea to compare it with the installed bulb in your vehicle.
Both the brake light bulb and tail light bulb are listed as 7506R. That makes it easier to stock a spare if you want to replace both sides together.
The license plate light bulb is 6418. If your plate lights are dim or one side is out, replacing both bulbs at the same time is often a smart maintenance step.
The front fog light bulb is listed as H11 LED or H16 LED. Because fog light fitment can vary, check the exact lamp and connector style on your vehicle before buying.
Yes, the map light bulb, dome light bulb, trunk or cargo area light, interior door light bulb, and vanity mirror light bulb are all listed with 2825, 98 or 6418 depending on the position. The exact bulb can differ by location, so match the chart carefully.
The glove box light bulb is 2821. This is a separate fitment from several other interior lamps, so do not assume it uses the same bulb as the map or dome light.
The front side marker light bulb is listed as 2825, 98, while the rear side marker light bulb is 2821. Front and rear side markers are not the same on this vehicle, so verify the position before ordering.
Yes. The chart shows LED for the center high mount stop light, parking light, daytime running light, and some fog light configurations. That means some exterior lamps may already be LED from the factory, while others use replaceable bulbs.
Checking the installed bulb helps confirm the exact base and size, which is important on the 2012 Audi Q5 because trim and lighting package differences can change fitment. It also helps avoid problems when a previous owner has installed aftermarket bulbs or conversions.