Used for: Fog Light Bulb Rear, Back Up Light Bulb, Back Up Reverse Light Bulb
Used for: Headlight Bulb High Beam, Headlight Bulb Low Beam
Used for: Cornering Light Bulb
Used for: Turn Signal Light Bulb Front
Used for: Glove Box Light Bulb
This page helps you verify bulb sizes for the 2020 Audi Q5 by lighting position, so you can match the correct replacement before you buy. Because Audi used different lighting setups depending on trim, market, and body style, checking the bulb location is the safest way to confirm fitment.
On the 2020 Audi Q5, many exterior and interior lamps are LED-based, while a few positions use specific service bulbs such as 921, 194, H8 LED, and 12174NA. Use the chart on this page to identify the exact bulb type for the headlight, tail light, brake light, license plate light, cargo area, and other locations on the vehicle.
Fitment can vary with trim package, lighting package, and regional equipment, so always compare the bulb position on your vehicle with the chart before ordering. Some Q5 models use factory LED assemblies, while others may have halogen-style service bulbs or LED modules that are not meant to be swapped like a standard bulb. If you are considering aftermarket LED conversions, check for proper connector style, beam pattern, and warning-light compatibility. The best practice is to inspect the installed bulb or housing first, especially for exterior lights, because the same model year can have different parts depending on options.
The 2020 Audi Q5 low beam headlight is listed as LED, D5S on this page.
The high beam headlight is listed as LED, D5S for the 2020 Audi Q5.
The rear turn signal bulb is listed as LED on this page, so it is not shown as a separate standard replaceable bulb number.
The front turn signal bulb is listed as 12174NA.
The backup light and back up reverse light positions are listed as 921.
The rear fog light is listed as 921.
The glove box light bulb is listed as 194.
The cornering light is listed as H8 LED.
On this page, both the brake light and tail light are listed as LED, which usually means the light source is part of an LED assembly rather than a simple bulb swap.
No. The license plate light is listed as LED, while interior positions such as the dome light, map light, vanity mirror light, door light, stepwell light, trunk or cargo area light, and glove box light are listed separately.
Because trim and lighting package differences can change the bulb used in a given position. Checking the installed bulb or the housing label helps avoid ordering the wrong part.
Yes, in some positions, but fitment depends on the socket, electronics, and housing design. Make sure the replacement matches the vehicle and does not create fitment issues or warning messages.
This page lists LED for the dome light, map light, vanity mirror light, interior door light, trunk or cargo area light, and stepwell light, plus 194 for the glove box light.
Not always. Trim level, market, body style, and lighting package can change the bulb setup, so the chart should be used as a position-by-position guide rather than a one-size-fits-all answer.
