
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam and Low Beam(with halogen headlights)
Used for: Headlight Bulb High Beam and Low Beam(with HID headlights)
Used for: Back Up Reverse Light Bulb
Used for: License Plate Light Bulb
Used for: License Plate Light Bulb
Used for: Parking Light Bulb, Turn Signal Light Bulb Front
Used for: Turn Signal Light Bulb Rear
Used for: Interior Door Light Bulb
Used for: Interior Door Light Bulb
Used for: Vanity Mirror Light Bulb
This 2018 Buick Envision bulb size page is designed to help you verify the correct bulbs by lighting position before you buy replacements. Whether you are changing an exterior lamp or a cabin light, matching the bulb to the exact location is the easiest way to avoid fitment mistakes.
For the 2018 Buick Envision, several lighting positions use LED assemblies, while others use replaceable bulbs such as 921, 194, 7441, 7444NA, 7440A, D3S, 2825, 98, 7065, H11 LED, H16 LED, and 9012 depending on the light and equipment. Because trim and lighting package can vary, always confirm the bulb type for your specific vehicle.
Fitment can differ by trim, market, and body style, so use the bulb chart as a guide and compare it with the bulb already installed in your Envision before ordering. This is especially important when choosing between halogen and HID headlight setups, or when replacing fog lights and other positions that may accept LED or halogen-style parts depending on the package. If you are planning an aftermarket LED conversion, make sure the bulb base, physical size, and beam pattern are compatible with the housing, and check for warning messages or flicker issues. When in doubt, remove the old bulb and verify the number printed on it before purchase.
Vehicles with HID headlights use D3S for both high beam and low beam. Vehicles with halogen headlights use 9012 for the high beam and low beam setup.
No. The 2018 Buick Envision can come with either HID headlights or halogen headlights, and the bulb type depends on the equipment installed on your vehicle.
The back up reverse light bulb is 921.
Both the front turn signal light and the front parking light use 7444NA.
The rear turn signal light bulb is 7440A.
The license plate light bulb can be 2825 or 98, depending on the exact lamp setup.
The interior door light bulb can be 194 or 7441.
The front fog light bulb can be H11 LED or H16 LED, depending on the vehicle’s lighting package.
Yes. The trunk or cargo area light, dome light, and map light are listed as LED on this page, so the assembly or LED module may differ from a simple standard bulb replacement.
On this page, the center high mount stop light, brake light, tail light, daytime running light, and side marker lights are listed as LED.
Because trim and lighting package differences can change the bulb type. Checking the installed bulb helps confirm the correct fit, especially for headlights, fog lights, and interior lamps.
Often yes, but aftermarket LED conversions should be checked carefully for base fit, housing clearance, beam pattern, and possible electrical issues. The bulb may fit physically, but performance and legality can vary.