
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam and Low Beam(with HID headlights)
Used for: Back Up Reverse Light Bulb
Used for: License Plate Light Bulb
Used for: License Plate Light Bulb
Used for: Parking Light Bulb, Turn Signal Light Bulb Front
Used for: Turn Signal Light Bulb Rear
Used for: Interior Door Light Bulb
Used for: Interior Door Light Bulb
Used for: Vanity Mirror Light Bulb
This page helps you verify the bulb sizes for the 2020 Buick Envision by lighting position, so you can match the correct replacement before you buy. Because Buick used different lighting setups on this model, the exact bulb type can change depending on the lamp location and the vehicle’s trim or package.
For the 2020 Buick Envision, many exterior and interior lights use LED assemblies, while a few positions still use replaceable bulbs such as the back up reverse light, license plate light, turn signals, parking lights, and some interior lamps. Checking the bulb chart by location is the easiest way to avoid ordering the wrong part.
Fitment can vary by market, trim, body style, and lighting package, so always compare the bulb position on your vehicle with the chart before purchasing. The 2020 Envision may have LED or HID headlight systems depending on configuration, and those setups do not use the same replacement bulbs as halogen-style housings. If you are considering aftermarket LED conversions, make sure the bulb base, size, and beam pattern are compatible with the housing. It is also smart to remove the installed bulb and confirm the number printed on it before you buy, especially for smaller interior or exterior bulbs where 194, 7441, 7444NA, 7440A, 2825, 98, 7065, 921, H11 LED, H16 LED, or D3S fitments may apply.
The 2020 Buick Envision can use LED headlight assemblies or HID headlight bulbs, depending on the vehicle. For models with LED headlights, the high beam and low beam are listed as LED. For models with HID headlights, the high beam and low beam bulb is D3S.
The back up reverse light bulb is 921 on the 2020 Buick Envision.
The front turn signal light bulb is 7444NA.
The rear turn signal light bulb is 7440A.
The parking light bulb is 7444NA.
The license plate light bulb can be 2825 or 98, depending on the exact setup.
The interior door light bulb can be 194 or 7441.
The front fog light bulb can be H11 LED or H16 LED, depending on the trim and lighting package.
Yes. The dome light bulb, map light bulb, and trunk or cargo area light are listed as LED on the 2020 Buick Envision.
Yes. The brake light bulb, tail light bulb, center high mount stop light, daytime running light, side marker light front, and side marker light rear are listed as LED.
Because the 2020 Buick Envision can have different lighting packages and trim-dependent equipment. A bulb that fits one position, such as a license plate light or fog light, may not fit another position on the same vehicle.
Yes, in some positions, but the bulb must match the socket, size, and housing design. Aftermarket LED conversions should be checked carefully for fitment, beam pattern, and compatibility with the vehicle’s lighting system.