
PIAA 19615 9005 (HB3) Xtreme White Plus
$64.57
Buy on Amazon →
Used for: Headlight Bulb High Beam
Used for: Headlight Bulb High Beam and Low Beam
Used for: Headlight Bulb Low Beam
Used for: Back Up Reverse Light Bulb
Used for: Daytime Running Light Bulb(with halogen headlights)
Used for: Daytime Running Light Bulb(with halogen headlights)
Used for: Daytime Running Light Bulb(with HID headlights), Parking Light Bulb(with HID headlights)
Used for: License Plate Light Bulb, Dome Light Bulb, Map Light Bulb
Used for: License Plate Light Bulb, Dome Light Bulb, Map Light Bulb
Used for: Parking Light Bulb(with halogen headlights), Side Marker Light Bulb Front, Turn Signal Light Bulb Front Inner
Used for: Turn Signal Light Bulb Front Outer
Used for: Turn Signal Light Bulb Rear
Used for: Glove Box Light Bulb, Interior Door Light Bulb, Trunk or Cargo Area Light
Used for: Glove Box Light Bulb, Interior Door Light Bulb, Trunk or Cargo Area Light
Used for: Vanity Mirror Light Bulb
This 2010 Cadillac SRX bulb size guide helps you verify the correct bulb by lighting position, so you can replace the right lamp without guesswork. Whether you are changing an exterior signal bulb, a cabin light, or a headlight, the goal is to match the bulb to the exact location on your SRX.
Because the 2010 Cadillac SRX could be equipped with different lighting setups, this page organizes the bulb chart by function and position. That makes it easier to confirm the correct fit for your specific vehicle before you buy replacement bulbs.
Fitment can vary by trim, lighting package, market, and body style, so always compare your existing bulb to the chart before ordering. The 2010 SRX may use different bulbs for halogen headlights versus HID headlights, and some positions also have LED replacement options or LED-style conversions. If you are upgrading from halogen to aftermarket LED bulbs, make sure the new bulb matches the socket, clearance, and beam pattern requirements for safe use. The most reliable step is to remove the installed bulb and check the marking on the base before purchase, especially for exterior lamps and any light that may have been changed previously.
The low beam bulb is H11 on halogen headlight setups. If your SRX has HID headlights, the headlight bulb type is D2S for the combined high and low beam configuration.
The high beam bulb is 9005 on the standard halogen setup. On HID-equipped vehicles, the headlight system uses D2S instead of separate halogen high and low beam bulbs.
The front outer turn signal bulb is 2827.
The front inner turn signal bulb is 7444NA.
The rear turn signal bulb is 7440.
With halogen headlights, the parking light bulb is 7444NA. With HID headlights, the parking light bulb is 7443.
With halogen headlights, the daytime running light bulb can be H11 LED or H16 LED. With HID headlights, the daytime running light bulb is 7443.
The license plate light bulb is 2825 or 98.
Both the dome light and map light use 2825 or 98 bulbs.
Those interior positions use 194 or 7441 bulbs, including the glove box light, trunk or cargo area light, and interior door light bulb.
The vanity mirror light bulb is 6612F.
The back up reverse light bulb is 5008.
Yes. The center high mount stop light, brake light, tail light, and rear side marker light are listed as LED on this page, so those positions may differ from the standard replaceable halogen-style bulbs.
Trim and lighting package differences can change the correct bulb type, and previous owners may have installed non-original bulbs. Checking the bulb already in the vehicle helps confirm the exact fit before you order.