Cadillac SRX 2014 Bulb Size
Bulb size chart
This 2014 Cadillac SRX bulb size guide helps you quickly verify the correct bulb by lighting position, so you can match the right replacement before you buy. Whether you are changing a headlight, a courtesy lamp, or a license plate light, the goal is to make fitment easier and reduce guesswork.
The 2014 Cadillac SRX uses different bulb types depending on the lamp location and headlight setup, so it is important to check the exact position on the vehicle. This page organizes the common exterior and interior bulb sizes for the 2014 SRX in a simple way that is useful for repairs, upgrades, and routine maintenance.
Fitment can vary by trim, lighting package, market, and body style, so always compare the bulb on your vehicle with the listing before ordering. The SRX may use different bulbs for halogen and HID headlight setups, and some owners choose aftermarket LED conversions for brighter output or a whiter color. If you are switching to LED, make sure the bulb is compatible with the socket and that the beam pattern, polarity, and any required resistors or CAN-bus features are appropriate. When possible, check the installed bulb before purchase, especially for exterior lights where previous repairs or package differences may have changed the original part.
FAQ
What is the low beam bulb size for a 2014 Cadillac SRX?
The low beam bulb size listed for the 2014 Cadillac SRX is H11 for models with halogen headlights. Vehicles equipped with HID headlights use D2S for the combined high and low beam setup.
What bulb does the high beam use on the 2014 SRX?
The high beam bulb size is 9005 on halogen headlight versions of the 2014 Cadillac SRX. If your SRX has HID headlights, the headlight system uses D2S instead of separate halogen high and low beam bulbs.
Which bulb is used for the front daytime running light?
For 2014 Cadillac SRX models with halogen headlights, the daytime running light bulb can be H11 LED or H16 LED. For HID headlight versions, the daytime running light bulb is 7443.
What is the parking light bulb size on this SRX?
Parking light fitment depends on the headlight package. Halogen headlight models use 7444NA, while HID headlight models use 7443 for the parking light.
What bulb fits the front turn signal on a 2014 Cadillac SRX?
Front turn signal fitment can vary by position. The front inner turn signal uses 7444NA, while the front outer turn signal uses 2827. Some listings also note compare-to-original options for the same front signal locations.
What bulb does the rear turn signal use?
The rear turn signal bulb size for the 2014 Cadillac SRX is 7440.
What are the brake and tail light bulb types?
The brake light, tail light, center high mount stop light, and rear side marker light are listed as LED on this page. That means the assembly uses LED lighting for those positions rather than a standard replaceable halogen bulb size.
What bulb is used for the back up reverse light?
The back up reverse light bulb size listed for the 2014 Cadillac SRX is 5008.
What bulb fits the license plate lights?
The license plate light bulb size is 2825 or 98. Both sizes are listed for this position on the 2014 Cadillac SRX.
What interior bulbs does the 2014 SRX use?
Common interior bulb sizes on this model include 2825 or 98 for the dome light and map light, and 194 or 7441 for the glove box light, trunk or cargo area light, interior door light, and courtesy light. The vanity mirror light uses 6612F.
Are the bulb sizes the same on every 2014 Cadillac SRX?
Not always. Trim level, lighting package, market, and body style can change the bulb used in certain positions. The most important differences are usually between halogen and HID headlight setups and between standard and package-specific exterior lighting.
Should I check the installed bulb before buying a replacement?
Yes. Checking the installed bulb is the safest way to confirm fitment, especially if the vehicle has been repaired before, has aftermarket lighting, or may have a different package than expected. Matching the bulb by position and by what is actually installed helps avoid returns and installation issues.