
PIAA 15223 H3 Xtreme White Plus
$67.15
Buy on Amazon →
Used for: Fog Light Bulb Front(Coupe)
Used for: Fog Light Bulb Front(Coupe)
Used for: Headlight Bulb High Beam, Daytime Running Light Bulb
Used for: Headlight Bulb High Beam and Low Beam
Used for: Headlight Bulb Low Beam
Used for: Back Up Light Bulb(Coupe), Turn Signal Light Bulb Front(Coupe), Turn Signal Light Bulb Rear(Coupe)
Used for: Back Up Reverse Light Bulb, Center High Mount Stop Light Bulb
Used for: Brake Light Bulb(Convertible), Tail Light Bulb(Convertible), Turn Signal Light Bulb Rear(Convertible)
Used for: Brake Light Bulb(Coupe), Tail Light Bulb(Coupe)
Used for: License Plate Light Bulb, Parking Light Bulb
Used for: License Plate Light Bulb, Parking Light Bulb
Used for: Parking Light Bulb(Convertible), Side Marker Light Bulb Front(Convertible), Turn Signal Light Bulb Front(Convertible)
Used for: Side Marker Light Bulb Front(Coupe), Side Marker Light Bulb Rear(Convertible)
Used for: Side Marker Light Bulb Rear(Coupe)
This page helps you find the correct bulb sizes for the 2000 Chrysler Sebring by lighting position, so you can match the right bulb to the right lamp before you buy. Because Sebring lighting can differ by body style and trim, using a position-based bulb chart is the easiest way to verify fitment for headlights, brake lights, turn signals, reverse lights, and smaller exterior lamps.
For the 2000 Chrysler Sebring, the listed bulb sizes include common choices such as 9005 for high beam and daytime running light on some setups, 9006 for low beam, 9007 for combined high and low beam applications, and 921, 168, 1156, 2057R, 3457, 3157A, 168NA, and H3C/H3 for other exterior positions. Always match the bulb to the exact location on your car, since coupe and convertible lighting layouts are not always the same.
Fitment on the 2000 Chrysler Sebring can vary by market, trim, and lighting package, so it is smart to confirm the installed bulb before ordering replacements. Some positions may use halogen bulbs from the factory, while others may be converted to LED by a previous owner; if you are switching to aftermarket LED bulbs, make sure the bulb base, polarity, and physical clearance are compatible with the housing. For the best result, compare the old bulb number with the chart, and if the lamp has been replaced or modified, inspect the actual bulb in the vehicle before purchase.
The chart lists 9006 for the low beam headlight on the 2000 Chrysler Sebring. Some versions may differ by body style or lighting package, so verify the installed bulb if your car has been modified.
High beam bulbs are listed as 9005 on some 2000 Sebring setups. There is also a 9007 listing for headlight applications on certain versions, so check whether your car uses separate bulbs or a combined high/low beam design.
On the listed setup, the daytime running light bulb is 9005. If your car has a different lighting package, confirm the bulb in the housing before ordering.
The back up reverse light bulb is listed as 921. This size is commonly used in small rear lamp positions on the Sebring.
The license plate light bulb is listed as 168 or 917. Either size may appear depending on the exact lamp assembly, so check the existing bulb if you are unsure.
The parking light bulb is listed as 168 or 917 on some versions. Convertible-specific parking light listings may use 3157A, so body style matters.
Not always. The coupe and convertible can use different bulbs for turn signals, brake lights, tail lights, side markers, and parking lights. For example, coupe rear brake and tail lights are listed as 2057R, while convertible rear brake and tail lights are listed as 3457.
For the coupe, the rear brake light bulb and tail light bulb are listed as 2057R. The rear side marker light bulb is also listed as 2057 on the coupe.
For the convertible, the rear turn signal bulb, brake light bulb, and tail light bulb are all listed as 3457. This is one of the clearest examples of why body style matters on the 2000 Sebring.
The front fog light bulb on the coupe is listed as H3C or H3. If your car has aftermarket fog lamps, the bulb type may still be H3, but it is best to confirm the socket and housing.
Check the body style, trim, and lighting package, then compare the installed bulb number with the chart. Also confirm whether the vehicle still uses halogen bulbs or has been converted to LED, because aftermarket changes can affect fitment and function.
Yes, many owners do, but the LED replacement must match the bulb base and fit inside the housing. Some lamps may also need attention to polarity, beam pattern, or load issues, especially on turn signals and brake lights.