
PIAA 19615 9005 (HB3) Xtreme White Plus
$64.57
Buy on Amazon →
Used for: Headlight Bulb High Beam
Used for: Back Up Reverse Light Bulb
Used for: Brake Light Bulb(Convertible), Tail Light Bulb(Convertible)
Used for: Brake Light Bulb(Sedan), Tail Light Bulb(Sedan)
Used for: Center High Mount Stop Light Bulb
Used for: Daytime Running Light Bulb, Parking Light Bulb(Sedan), Side Marker Light Bulb Front(Sedan), Turn Signal Light Bulb Front(Sedan)
Used for: License Plate Light Bulb
Used for: License Plate Light Bulb
Used for: License Plate Light Bulb(Convertible)
Used for: License Plate Light Bulb(Convertible)
Used for: Parking Light Bulb(Convertible), Side Marker Light Bulb Front(Convertible), Turn Signal Light Bulb Front(Convertible)
Used for: Turn Signal Light Bulb Rear
Used for: Courtesy Light Bulb, Dome Light Bulb
Used for: Glove Box Light Bulb
Used for: Glove Box Light Bulb
Used for: Map Light Bulb(Sedan)
Used for: Trunk or Cargo Area Light
This 2009 Chrysler Sebring bulb size guide helps you verify the correct replacement bulb by lighting position, so you can match the right part before you buy. Whether you are replacing a headlight, interior lamp, or rear signal bulb, this page organizes the common bulb types used on the 2009 Sebring by location for faster lookup.
Bulb fitment can vary by body style and equipment level, especially on Sebring sedan and convertible models. Use the listings here as a practical reference for the 2009 Chrysler Sebring, and compare the bulb position on your vehicle with the chart before ordering replacement bulbs.
For best results, confirm your trim and lighting package, since some exterior and interior bulbs differ between sedan and convertible versions. Halogen bulbs are the factory-style choice for many positions, while LED replacements may be used in some interior or license plate locations if they are compatible with the housing and electrical system. Aftermarket LED conversions can change brightness, beam pattern, or warning behavior, so check fitment carefully. If possible, remove the installed bulb and read the number on the base before purchase, especially for positions that can use more than one bulb code.
The listed high beam headlight bulb for the 2009 Chrysler Sebring is 9005.
For the sedan, the front parking light bulb is 3757A.
The sedan front turn signal light bulb is 3757A.
The front side marker light bulb for the sedan is 3757A.
The rear turn signal light bulb is 3057.
The sedan uses 3157R for both the brake light bulb and the tail light bulb.
The convertible uses 3057R for both the brake light bulb and the tail light bulb.
The back up reverse light bulb is 3157.
The center high mount stop light bulb is 921.
For the sedan, the license plate light bulb is listed as 168 or 917. For the convertible, the license plate light bulb is listed as 2825 or 98.
Interior bulb listings include 578 for the dome light and courtesy light, 562 for the trunk or cargo area light, 194 or 7441 for the glove box light, and 212-2 for the sedan map light. A map light LED listing is also shown on the page.
Yes, some bulb sizes differ by body style. For example, the sedan and convertible use different rear brake/tail bulb numbers, and the front parking, side marker, and turn signal bulbs can also differ.
Yes. Even with a year-specific guide, it is smart to verify the installed bulb number on your vehicle because trim and lighting package differences can affect fitment.
In some positions, yes, but the replacement must fit the socket and work correctly with the housing. LED swaps can affect brightness, beam pattern, and compatibility, so confirm the bulb base and application before buying.