
PIAA 19615 9005 (HB3) Xtreme White Plus
$64.57
Buy on Amazon →
Used for: Headlight Bulb High Beam
Used for: Back Up Reverse Light Bulb, Turn Signal Light Bulb Rear
Used for: Brake Light Bulb, Tail Light Bulb
Used for: Center High Mount Stop Light Bulb
Used for: Daytime Running Light Bulb, Parking Light Bulb, Turn Signal Light Bulb Front
Used for: License Plate Light Bulb
Used for: License Plate Light Bulb
Used for: Side Marker Light Bulb Front
Used for: Dome Light Bulb
Used for: Glove Box Light Bulb
Used for: Glove Box Light Bulb
Used for: Instrument Panel Light Bulb
Used for: Map Light Bulb
Used for: Map Light Bulb
Used for: Trunk or Cargo Area Light
This page for the 2008 Dodge Avenger helps you verify the correct bulb size by lighting position, so you can match the right replacement to the right socket. Because bulb fitment can change with trim level, market, and body style, it is always smart to confirm the exact lamp location before ordering.
Use the bulb chart below as a quick reference for common exterior and interior lights on the 2008 Dodge Avenger. It covers items such as the high beam headlight, tail and brake lights, front and rear turn signals, license plate lights, dome and map lights, and other small interior bulbs.
For best fitment, compare the listed bulb size with the bulb already installed in your car before buying, especially if your Avenger has a different lighting package or was built for another market. Halogen and LED replacements may both fit the same socket, but they can differ in brightness, beam pattern, polarity, and heat output. If you are planning an aftermarket LED conversion, make sure the bulb is compatible with the housing and that it will not cause warning messages, hyperflash, or uneven light output. When possible, remove one bulb first and use the original part number or the printed marking on the bulb to confirm the match.
The high beam headlight bulb listed for the 2008 Dodge Avenger is 9005.
The center high mount stop light bulb size listed for this model is 921.
The license plate light bulbs listed are 168 and 917, depending on the setup.
The glove box light bulb is listed as 194 or 7441.
The map light bulb sizes listed are 2825 and 98.
Both the brake light and tail light bulb are listed as 3157R.
The rear turn signal light bulb and the back up reverse light bulb are both listed as 3157.
Those front lighting positions are listed as 3457A for the turn signal, parking light, and daytime running light.
The front side marker light bulb is listed as 194NA.
The dome light bulb is listed as 578, and the trunk or cargo area light is listed as 579.
Yes. Trim, lighting package, market, and body style can affect bulb fitment, so it is important to verify the bulb by position before purchase.
Either can work if the bulb matches the socket and the housing supports it, but LED upgrades may need extra checking for beam pattern, polarity, and compatibility.
Check the bulb currently installed, compare the printed number to the chart, and confirm the exact lighting position on your 2008 Dodge Avenger before buying.
The instrument panel light bulb is listed as PC74.