
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam, Daytime Running Light Bulb
Used for: Back Up Reverse Light Bulb
Used for: License Plate Light Bulb, Map Light Bulb
Used for: License Plate Light Bulb, Map Light Bulb
Used for: Parking Light Bulb, Turn Signal Light Bulb Front
Used for: Side Marker Light Bulb Front
Used for: Dome Light Bulb
Used for: Instrument Panel Light Bulb
Used for: Trunk or Cargo Area Light
This 2013 Dodge Avenger bulb size guide helps you verify the correct bulbs by lighting position, so you can replace the right part the first time. Whether you are changing a headlight, tail lamp, license plate light, or interior bulb, this page organizes the common fitments for the 2013 Avenger in one place.
Because trim level, lighting package, market, and body style can affect bulb fitment, it is always smart to confirm the bulb location before ordering. Use this guide as a quick reference for the 2013 Dodge Avenger and compare it with the bulb already installed in your vehicle when possible.
Fitment can vary between trims and between halogen and LED-equipped vehicles, so the exact bulb used on your Avenger may depend on the equipment package. Some positions may also have been changed with aftermarket LED conversions, which can alter the bulb type or the way the light functions. Before buying replacement bulbs, check the installed bulb number, inspect the socket, and compare the old bulb to the new one to make sure the base and size match. This is especially important for exterior lights, where a wrong bulb can cause warning messages, poor beam pattern, or a loose fit.
The 2013 Dodge Avenger uses a 9005 bulb for the high beam headlight.
The daytime running light bulb size listed for the 2013 Dodge Avenger is 9005.
Front fog light fitment is listed as H11 LED or H16 LED, depending on the vehicle setup and lighting package.
The back up reverse light bulb is listed as 921 for the 2013 Dodge Avenger.
The license plate light bulb is listed as 2825 or 98.
The map light bulb is listed as 2825 or 98.
The dome light bulb is listed as 578.
The trunk or cargo area light bulb is listed as 579.
The front turn signal light bulb is listed as 3457A.
The front parking light bulb is listed as 3457A.
The front side marker light bulb is listed as 2827.
The rear side marker light bulb is LED on this page, so the exact replacement may depend on the lamp assembly and whether the unit is serviceable.
Yes, the bulb chart on this page lists the center high mount stop light, brake light, tail light, and rear turn signal light as LED.
Yes, many owners replace halogen bulbs with LED upgrades, but the bulb must match the socket and the beam or light output should still be suitable for the housing. Check fitment carefully before installing an LED conversion.
Checking the installed bulb helps confirm the exact base and size, which is useful because trim and lighting package differences can change fitment on the 2013 Dodge Avenger.