
LUYED Fog Lights 880 881 LED Fog Light Bulbs - 899 893 88...
$16.49
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam and Low Beam
Used for: Back Up Reverse Light Bulb, Turn Signal Light Bulb Rear
Used for: Brake Light Bulb, Tail Light Bulb
Used for: Center High Mount Stop Light Bulb
Used for: License Plate Light Bulb
Used for: License Plate Light Bulb
Used for: Parking Light Bulb, Turn Signal Light Bulb Front
Used for: Side Marker Light Bulb Front
Used for: Side Marker Light Bulb Rear
Used for: Ash Tray Light Bulb, Instrument Panel Light Bulb(Compare to original - Option 1)
Used for: Check Engine Light Bulb, High Beam Indicator Light Bulb, Instrument Panel Light Bulb(Compare to original - Option 3), Parking Brake Indicator Light Bulb, Turn Signal Indicator Light Bulb
Used for: Courtesy Light Bulb(Compare to original - Option 1), Map Light Bulb
Used for: Courtesy Light Bulb(Compare to original - Option 2)
Used for: Dome Light Bulb
Used for: Engine Compartment Light Bulb
Used for: Glove Box Light Bulb
Used for: Glove Box Light Bulb
Used for: Ignition Light
Used for: Instrument Panel Light Bulb(Compare to original - Option 2)
Used for: Trunk or Cargo Area Light
If you need bulb sizes for a 2000 Dodge Durango, this page organizes the common exterior and interior lamps by lighting position so you can verify the right fit before you buy. That makes it easier to match the bulb to the exact job, whether you are replacing a headlight, tail light, dome light, or a small dash indicator.
The 2000 Durango used several different bulb types depending on the lamp location, and trim or lighting package can change what is installed. Use this guide to compare each bulb by position, then confirm the part number against the bulb already in your vehicle for the most accurate replacement.
For the best fitment results, always check the installed bulb before ordering, especially on a vehicle this age where previous owners may have used aftermarket parts. Trim level, market differences, and optional equipment can affect certain lamps, and halogen bulbs should be matched carefully if you are converting to LED. Some LED upgrades may need resistors or compatible housings to avoid hyperflash, dim output, or warning issues, so verify the setup before changing the bulb style. When in doubt, compare the old bulb’s number, base shape, and connector style to the listing on this page.
The listed headlight bulb for both high beam and low beam on the 2000 Dodge Durango is 9007.
Both the front turn signal light and the front parking light use 3157 bulbs on this model year.
The brake light bulb and tail light bulb are both listed as 3057R for the 2000 Dodge Durango.
The rear turn signal light uses a 3057 bulb, and the back up reverse light also uses a 3057 bulb.
The center high mount stop light bulb is 921.
The license plate light bulb is listed as 168 or 917, depending on the installed lamp setup.
The dome light bulb is 211-2.
The map light bulb is 579, and one courtesy light listing also uses 579.
The glove box light bulb is listed as 194 or 7441.
The front side marker light bulb is 194NA.
The rear side marker light bulb is 3057A.
Check the exact lamp position, the bulb number on the old bulb, and whether your Durango has any optional lighting package or previous aftermarket changes. That is the safest way to confirm fitment before purchase.
Yes, many owners replace halogen bulbs with LED equivalents, but fitment and performance can vary. Make sure the LED matches the base type and consider compatibility issues such as hyperflash, beam pattern, or the need for load resistors.
No. Trim and lighting package can vary by market and body style, so some bulbs may differ from one vehicle to another. Always verify the bulb in your specific Durango.