
PIAA 19615 9005 (HB3) Xtreme White Plus
$64.57
Buy on Amazon →
Used for: Headlight Bulb High Beam, Daytime Running Light Bulb
Used for: Headlight Bulb Low Beam(with halogen headlights)
Used for: Headlight Bulb Low Beam(with HID headlights)
Used for: Back Up Reverse Light Bulb
Used for: Brake Light Bulb, Tail Light Bulb Outer
Used for: License Plate Light Bulb
Used for: License Plate Light Bulb
Used for: Parking Light Bulb, Turn Signal Light Bulb Front
Used for: Side Marker Light Bulb Front, Courtesy Light Bulb
Used for: Side Marker Light Bulb Front, Courtesy Light Bulb
Used for: Stepwell Light Bulb
Used for: Tail Light Bulb Inner, Glove Box Light Bulb
Used for: Tail Light Bulb Inner, Glove Box Light Bulb
Used for: Turn Signal Light Bulb Rear
Used for: Check Engine Light Bulb, High Beam Indicator Light Bulb, Parking Brake Indicator Light Bulb, Turn Signal Indicator Light Bulb
Used for: Instrument Panel Light Bulb
Used for: Trunk or Cargo Area Light
This 2013 Dodge Durango bulb size guide helps you verify the correct bulb by lighting position, so you can match the right replacement before you buy. Whether you are changing a headlight, brake light, license plate lamp, or interior bulb, the goal is to make fitment easier and reduce guesswork for your Durango.
Bulb sizes on the 2013 Dodge Durango can vary by trim, lighting package, and market, especially for headlamps and some rear lighting. Use the chart on this page to compare each bulb location with the correct type for your specific vehicle, including halogen and HID headlight setups.
For the best fit, always confirm your Durango’s trim and the lighting package already installed on the vehicle. Some 2013 Dodge Durango models use halogen low beams, while others may have HID low beams, and aftermarket LED or HID conversions can change the bulb type you need. Before ordering, check the bulb currently installed in the housing and compare it with the chart, since previous owners may have replaced original bulbs with non-OE parts. When in doubt, verify the socket style, connector shape, and bulb markings directly on the vehicle.
For halogen-equipped models, the low beam headlight bulb is H11. Durango models with HID headlights use D1S for the low beam.
The high beam headlight bulb size is 9005.
The daytime running light bulb is 9005.
The front turn signal bulb is 7444NA.
The front parking light bulb is 7444NA.
The back up reverse light bulb is 921.
The license plate light bulb can be 168 or 917, depending on the specific setup.
The outer tail light bulb and brake light bulb are 3057R. The inner tail light bulb is 194 or 7441.
The rear turn signal light bulb is 3057.
The center high mount stop light uses an LED setup.
Interior and cabin-related bulbs listed for this model include 906 for the stepwell light, 103 for the instrument panel light, 214-2 for the trunk or cargo area light, and 194 or 7441 for the glove box light.
Not always. Trim, body style, and lighting package can change the bulb used in certain positions, especially headlights and some exterior lamps.
Yes, but fitment depends on the housing, socket, and local regulations. Some LED replacements may need additional parts or may not work correctly in every position.
Check the bulb currently installed in the vehicle, compare the socket and connector, and match it to the bulb position on the chart. This is especially important if the vehicle has been modified or has aftermarket lighting.