
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam and Low Beam(with halogen headlights)
Used for: Headlight Bulb High Beam and Low Beam(with HID headlights)
Used for: Back Up Reverse Light Bulb, Center High Mount Stop Light Bulb
Used for: Brake Light Bulb, Tail Light Bulb
Used for: License Plate Light Bulb
Used for: License Plate Light Bulb
Used for: Parking Light Bulb(Base), Turn Signal Light Bulb Front(Base)
Used for: Parking Light Bulb(Shelby GT500), Turn Signal Light Bulb Front(Shelby GT500)
Used for: Side Marker Light Bulb Front, Side Marker Light Bulb Rear, Map Light Bulb
Used for: Side Marker Light Bulb Front, Side Marker Light Bulb Rear, Map Light Bulb
Used for: Turn Signal Light Bulb Rear
Used for: Trunk or Cargo Area Light
This page helps you verify bulb sizes for the 2008 Ford Mustang by lighting position, so you can match the correct replacement to the exact lamp on the car. Whether you are replacing a headlight, marker light, license plate bulb, or interior lamp, checking the location first is the easiest way to avoid buying the wrong part.
The 2008 Mustang uses different bulb types depending on trim, lighting package, and whether the car has halogen or HID headlights. That means the same year can have more than one valid bulb size in some positions, so this guide is organized to make fitment easier to confirm before you order replacements.
For best results, compare the bulb listed for your specific trim with the bulb already installed in the vehicle. Base models, Shelby GT500 versions, and cars with optional lighting packages may use different bulbs for the same position, and halogen versus HID headlight setups are not interchangeable. If you are converting to aftermarket LED bulbs, make sure the bulb base, physical size, and beam pattern are compatible with the housing. When possible, remove one old bulb and read the marking on the glass or base before purchasing, especially for exterior lights where previous repairs or conversions may have changed the original setup.
2008 Ford Mustang models with halogen headlights use H13 bulbs for both the high beam and low beam function.
Models equipped with HID headlights use D3R bulbs. These are different from the halogen H13 setup and should not be mixed.
The base 2008 Ford Mustang uses a 3157 bulb for the front turn signal light.
The base model uses a 3157 bulb for the front parking light as well.
The Shelby GT500 uses 3156 bulbs for both the front parking light and the front turn signal light.
The rear turn signal light uses a 4057 bulb.
Both the brake light and tail light use 4057R bulbs on the 2008 Ford Mustang.
The back up reverse light uses a 921 bulb.
The center high mount stop light uses a 921 bulb.
The license plate light can use either a 168 or 917 bulb, depending on the exact lamp setup.
The map light uses a 2825 or 98 bulb.
The front side marker light uses a 2825 or 98 bulb.
The rear side marker light also uses a 2825 or 98 bulb.
The front fog lights may use H11 LED or H16 LED bulbs, depending on the specific housing and setup.
The trunk or cargo area light uses a 211-2 bulb.