
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam and Low Beam(with halogen headlights)
Used for: Headlight Bulb High Beam and Low Beam(with HID headlights)
Used for: Back Up Reverse Light Bulb
Used for: License Plate Light Bulb
Used for: Parking Light Bulb(Base, with halogen headlights)
Used for: Parking Light Bulb(Base, with HID headlights), Turn Signal Light Bulb Front(Compare to original - Option 1)
Used for: Parking Light Bulb(Shelby GT500), Turn Signal Light Bulb Front(Compare to original - Option 2)
Used for: Side Marker Light Bulb Front, Side Marker Light Bulb Rear
Used for: Trunk or Cargo Area Light
This page helps you verify bulb sizes for the 2011 Ford Mustang by lighting position, so you can match the correct replacement before you buy. Because Mustang trims and lighting packages can vary, the right bulb may depend on whether your car has halogen or HID headlights, plus the body style and market.
For the 2011 Ford Mustang, the chart covers common exterior and interior locations such as headlights, fog lights, turn signals, tail lights, brake lights, side markers, license plate lights, reverse lights, and the trunk or cargo area light. Use the position-specific listing to narrow down the exact bulb type for your vehicle and avoid ordering the wrong part.
Fitment can differ between base models, performance trims, and cars with factory lighting packages, so it is smart to compare the chart with the bulb already installed in your Mustang. The same year can use different bulbs for halogen versus HID setups, and some owners may have aftermarket LED conversions that change the required fitment or connector style. Before purchasing, check the existing bulb number, inspect the socket, and confirm whether your car uses the original equipment configuration or a modified lighting setup.
Start with the lighting position, such as headlight, tail light, brake light, or license plate light, then match it to the bulb type shown for that location. This is the safest way to confirm fitment on a 2011 Ford Mustang because different trims and packages can use different bulbs.
No. The 2011 Ford Mustang can use different headlight bulbs depending on the setup. Halogen headlights use H13, while HID headlights use D3S for the high beam and low beam application listed on this page.
The front fog light bulb listing for this page is H11 LED or H16 LED. Check the existing bulb and housing before ordering, since fitment can vary with equipment and aftermarket upgrades.
The back up reverse light bulb listed for this model is 912. If your Mustang has been modified or converted, verify the installed bulb before replacing it.
The license plate light bulb listed for the 2011 Ford Mustang is 6418. This is a common exterior bulb, but it is still a good idea to compare the old bulb to the chart before purchase.
The front side marker light bulb listed is 194NA. The rear side marker light bulb is also 194NA on this page.
The trunk or cargo area light bulb listed for the 2011 Ford Mustang is 211-2. If the light has been changed to LED or an aftermarket assembly, confirm the socket style first.
Not necessarily. This page lists separate positions for rear turn signal, tail light inner, tail light outer, brake light inner, and brake light outer, and each position should be checked individually. On this model, the chart shows LED for those rear lamp positions.
For base models with halogen headlights, the parking light bulb is listed as 3457. For base models with HID headlights, the parking light bulb is listed as 3457A. The correct choice depends on the headlight package installed on your Mustang.
No. The chart lists a separate parking light bulb for the Shelby GT500: 3156. Base model parking lights are listed differently, so trim matters here.
Yes, many owners upgrade to LED bulbs, but fitment and performance depend on the housing, connector, and whether the car uses halogen or HID equipment. Make sure the LED replacement matches the correct bulb size and is compatible with your specific trim and lighting package.
Trim level, body style, market, and lighting package can all change the bulb used in a given position. That is why it is important to verify the bulb by location and compare it with the bulb currently installed in your vehicle.