
PIAA 19615 9005 (HB3) Xtreme White Plus
$64.57
Buy on Amazon →
Used for: Headlight Bulb High Beam, Headlight Bulb Low Beam(LE), Daytime Running Light Bulb(LE)
Used for: Back Up Reverse Light Bulb
Used for: Brake Light Bulb(LE), Tail Light Bulb Outer
Used for: License Plate Light Bulb, Map Light Bulb
Used for: License Plate Light Bulb, Map Light Bulb
Used for: Parking Light Bulb, Turn Signal Light Bulb Front
Used for: Parking Light Bulb(EV), Side Marker Light Bulb Front(EV), Turn Signal Light Bulb Front(EV)
Used for: Side Marker Light Bulb Front(LE), Side Marker Light Bulb Rear(EV)
Used for: Side Marker Light Bulb Rear(LE)
Used for: Tail Light Bulb Inner(Compare to original - Option 1), Map Light Bulb, Vanity Mirror Light Bulb
Used for: Tail Light Bulb Inner(Compare to original - Option 1), Map Light Bulb, Vanity Mirror Light Bulb
Used for: Turn Signal Light Bulb Rear
Used for: Turn Signal Light Bulb Rear(LE)
Used for: Dome Light Bulb
Used for: Trunk or Cargo Area Light
This 2014 Toyota RAV4 bulb size guide helps you verify the correct bulb by lighting position, so you can match the right part before you buy. Whether you are replacing a headlight, tail light, reverse light, or interior bulb, using the position-specific listing is the easiest way to avoid fitment mistakes.
The 2014 Toyota RAV4 can use different bulbs depending on trim, market, body style, and lighting package. That is why this page separates each lamp location, including LED-equipped positions and halogen-style positions, so you can compare the bulb chart to the exact light you need to service.
For best results, confirm your trim and inspect the bulb already installed in the vehicle before ordering, especially if your RAV4 has an LE, EV, or other package-specific lighting setup. Some positions may be LED from the factory while others use standard halogen bulbs, and aftermarket LED conversions can change the bulb type or fitment requirements. If you are upgrading from halogen to LED, make sure the new bulb matches the socket, polarity, and available space inside the housing, since not every LED replacement is a direct plug-in. When in doubt, remove the old bulb and compare it to the listing before purchase.
The high beam headlight bulb listed for the 2014 Toyota RAV4 is 9005.
Low beam fitment can vary by trim and lighting package. The chart shows LED low beam listings as well as a 9005 low beam listing for LE-specific configurations, so you should verify the exact headlamp setup on your vehicle before buying.
The front turn signal bulb listed for this model is 7444NA. Some EV-related lighting entries may use 3457A instead, depending on the vehicle configuration.
The rear turn signal bulb is listed as 7440A for one configuration, while LE-specific rear turn signal fitment is listed as 7440.
The back up reverse light bulb listed for the 2014 Toyota RAV4 is 921.
The license plate light bulb sizes listed are 168 and 917.
The dome light bulb listed for this RAV4 is DE3175.
The trunk or cargo area light bulb listed is DE3022.
Several rear lighting positions are listed as LED, including the center high mount stop light, brake light, and tail light. However, some trims and markets may use different bulb arrangements, so it is still important to confirm the exact lamp on your vehicle.
The parking light bulb is listed as 7444NA, with an EV-specific parking light listing of 3457A.
Check the trim, market, and lighting package first, then compare the installed bulb to the chart. This is especially important for LED-equipped positions, LE-specific listings, and any aftermarket conversion that may have changed the original bulb type.
Yes, in many cases you can upgrade to LED, but the replacement must fit the socket and work with the housing. You should also confirm beam pattern, polarity, and available space so the upgrade does not cause fitment or lighting issues.