
PIAA 19615 9005 (HB3) Xtreme White Plus
$64.57
Buy on Amazon →
Used for: Headlight Bulb High Beam, Headlight Bulb Low Beam, Daytime Running Light Bulb
Used for: Back Up Reverse Light Bulb
Used for: Brake Light Bulb, Tail Light Bulb Outer
Used for: License Plate Light Bulb, Map Light Bulb
Used for: License Plate Light Bulb, Map Light Bulb
Used for: Parking Light Bulb, Turn Signal Light Bulb Front
Used for: Side Marker Light Bulb Front
Used for: Side Marker Light Bulb Rear
Used for: Tail Light Bulb Inner, Vanity Mirror Light Bulb
Used for: Tail Light Bulb Inner, Vanity Mirror Light Bulb
Used for: Turn Signal Light Bulb Rear
Used for: Dome Light Bulb
Used for: Trunk or Cargo Area Light
This 2015 Toyota RAV4 bulb size guide is designed to help you verify the correct replacement bulb by lighting position, so you can match the right fit before you buy. Whether you are replacing a headlight, interior lamp, or rear signal bulb, checking the exact location on the vehicle is the easiest way to avoid ordering the wrong part.
The 2015 Toyota RAV4 uses several different bulb types depending on the lamp position, and some trims or lighting packages may vary by market and body style. Use this page to compare the bulb chart for each exterior and interior light, including low beam, high beam, daytime running lights, reverse lights, license plate lights, and cargo area lighting.
Fitment can vary between trims, factory lighting packages, and regional specifications, so it is smart to confirm what is actually installed on your RAV4 before purchasing replacements. Some positions may use halogen bulbs from the factory, while others may be converted to LED with aftermarket kits, which can change brightness, beam pattern, or warning behavior. If your vehicle has been modified, always check the existing bulb and connector style before ordering, and compare the old bulb to the new one for base type and physical size. This is especially important for headlight and signal locations, where an aftermarket conversion may not match the original housing as well as a direct replacement bulb.
For the 2015 Toyota RAV4, both the high beam and low beam headlight bulbs are listed as 9005 on this page. Always verify the installed bulb and headlamp configuration before replacing them, since lighting equipment can vary by market or trim.
The daytime running light bulb is listed as 9005 for the 2015 Toyota RAV4. If your vehicle has been modified or uses a different market-specific setup, confirm the bulb in the housing before purchase.
The back up reverse light bulb is listed as 921. This is the bulb position to check if your reverse lights are dim, burned out, or need replacement after a tail lamp service.
The front turn signal light bulb is listed as 7444NA. This same bulb type is also used for the front parking light position on this page, so it is important to match the correct socket and function.
The rear turn signal light bulb is listed as 7440. If only one rear signal is out, replace the failed bulb with the same type and check the opposite side for similar wear.
Both the brake light bulb and the outer tail light bulb are listed as 7443R for the 2015 Toyota RAV4. These are separate lighting functions, but they use the same bulb type on this page.
The inner tail light bulb is listed as 194, 7441. This position can vary by lamp design, so it is a good idea to compare the old bulb before ordering a replacement.
The rear side marker light bulb is listed as 7443A. This is one of the rear lamp positions that may differ depending on trim or market, so checking the installed bulb is recommended.
The front side marker light bulb is listed as 168NA. Make sure the replacement matches the socket type and the original bulb shape if you are changing both sides.
The map light bulb is listed as 168, 917, the vanity mirror light bulb is listed as 194, 7441, and the dome light bulb is listed as DE3175. The trunk or cargo area light is listed as DE3022.
The license plate light bulb is listed as 168, 917. If the license plate area looks dim or one side is out, this is the bulb type to check first.
Yes, many owners choose LED replacements for brighter output or lower power draw, but fitment and compatibility matter. Make sure the LED matches the bulb base, fits the housing, and works properly with the vehicle’s lighting system before installing it.