
PIAA 19615 9005 (HB3) Xtreme White Plus
$64.57
Buy on Amazon →
Used for: Headlight Bulb High Beam
Used for: Headlight Bulb Low Beam
Used for: Back Up Reverse Light Bulb
Used for: Brake Light Bulb, Tail Light Bulb Outer
Used for: Daytime Running Light Bulb, Parking Light Bulb, Turn Signal Light Bulb Front
Used for: License Plate Light Bulb, Dome Light Bulb, Interior Door Light Bulb, Map Light Bulb
Used for: License Plate Light Bulb, Dome Light Bulb, Interior Door Light Bulb, Map Light Bulb
Used for: Side Marker Light Bulb Front
Used for: Side Marker Light Bulb Rear
Used for: Stepwell Light Bulb, Glove Box Light Bulb
Used for: Tail Light Bulb Inner
Used for: Tail Light Bulb Inner
Used for: Turn Signal Light Bulb Rear
Used for: Trunk or Cargo Area Light
Used for: Vanity Mirror Light Bulb
This 2010 Toyota Sequoia bulb size guide helps you verify the correct bulbs by lighting position, so you can replace only the lamp you need with confidence. Whether you are changing a headlight, tail light, interior bulb, or reverse light, matching the bulb to the exact location is the easiest way to avoid buying the wrong part.
The 2010 Sequoia uses several different bulb types across the exterior and interior lighting system. Common fitments on this page include H11 low beam headlights, 9005 high beam headlights, 921 reverse lights, and multiple interior bulbs such as 168, 917, 2721, and 578 depending on the position.
Fitment can vary by trim, lighting package, market, and body style, so it is smart to compare the bulb in your vehicle before ordering. Some replacements may be halogen from the factory, while others may be converted to LED with aftermarket kits, which can affect brightness, beam pattern, and warning behavior. If your Sequoia has been modified, always check the installed bulb and connector style, and confirm whether the new bulb is meant for direct replacement or for an LED conversion setup.
The 2010 Toyota Sequoia uses an H11 bulb for the low beam headlight position.
The high beam headlight bulb listed for the 2010 Sequoia is 9005.
The back up reverse light bulb for this model is 921.
The front turn signal light bulb is 4157NA, and that same bulb type is also listed for the parking light and daytime running light positions.
The rear turn signal light bulb is 7440A.
Both the brake light bulb and the outer tail light bulb are listed as 7443R.
The inner tail light bulb is 194, 7441.
The rear side marker light bulb is 7443A.
The front side marker light bulb is 168NA.
The license plate light, dome light, map light, and interior door light all use 168 or 917 bulbs on this page.
Both the glove box light and the stepwell light use 2721 bulbs.
The vanity mirror light bulb is 7065.
The trunk or cargo area light is listed as 578, and it may be optional depending on trim or equipment.
The center high mount stop light is listed as LED, so it may not use a replaceable standard halogen bulb like the other positions.
Because trim and lighting package differences can change the exact fitment, and previous owners may have installed different bulbs or LED conversions. Checking the installed bulb helps confirm the correct size and connector before purchase.