Chrysler Sebring 1999 Bulb Size
Bulb size chart
If you are looking up bulb sizes for a 1999 Chrysler Sebring, this page helps you verify the correct bulbs by lighting position. Because Sebring lighting can vary by trim, body style, and market, it is important to match the bulb to the exact lamp location before you buy.
Use the chart on this page to compare common exterior bulbs such as headlights, parking lights, turn signals, brake lights, reverse lights, license plate lights, and side markers. The 1999 Chrysler Sebring was offered in coupe and convertible forms, and the bulb type can differ between them.
For the best fit, confirm whether your Sebring uses halogen headlamps or a different lighting setup, and check whether your car has coupe- or convertible-specific lamps. Some positions may accept standard halogen bulbs, while others may be listed for LED use or may have aftermarket conversions already installed. Trim and lighting package differences can change the bulb size, so it is smart to inspect the installed bulb before ordering, especially if the car has been modified or repaired over the years.
FAQ
What bulb does the 1999 Chrysler Sebring use for the high beam headlight?
The listed high beam bulb sizes are 9005 for some applications and 9007 for headlight systems that use a combined high and low beam bulb. Check your specific lamp setup before buying.
What is the low beam bulb size on a 1999 Chrysler Sebring?
The low beam bulb listed for this model is 9006. Some trims or lighting packages may differ, so verify the bulb in the housing before replacement.
Which bulb fits the back up reverse light on a 1999 Chrysler Sebring?
The back up reverse light bulb listed is 921.
What bulb is used for the license plate light?
The license plate light bulb sizes listed are 168 and 917.
What bulb fits the parking light on this Sebring?
The parking light bulb sizes listed are 168 and 917 for some versions, while convertible applications may use 3157A.
What is the front turn signal bulb for the coupe?
For the coupe, the front turn signal bulb is listed as 1156.
What is the rear turn signal bulb for the coupe?
For the coupe, the rear turn signal bulb is listed as 1156.
What bulbs are used for the coupe brake and tail lights?
The coupe brake light bulb and tail light bulb are both listed as 2057R.
What bulbs are used for the convertible brake and tail lights?
The convertible brake light bulb and tail light bulb are both listed as 3457.
What is the fog light bulb for the coupe?
The front fog light bulb for the coupe is listed as H3C or H3.
What bulb fits the center high mount stop light?
The center high mount stop light bulb is listed as LED, 921.
Do coupe and convertible bulbs differ on the 1999 Chrysler Sebring?
Yes. Several bulbs differ by body style, including turn signals, brake lights, tail lights, side markers, and fog lights. Always match the bulb to coupe or convertible fitment.
Can I switch the original bulbs to LED?
In some positions, yes, but LED conversions may require the correct bulb base, polarity, and sometimes load resistors or compatible housings. Make sure the LED is approved for the specific lamp location.
Why should I check the installed bulb before ordering?
Because trim and market differences can change the bulb size, and older vehicles may have had bulbs replaced with non-original parts. Checking the installed bulb is the safest way to confirm fitment.