Chrysler Sebring 2010 Bulb Size
Bulb size chart
This 2010 Chrysler Sebring bulb size guide helps you verify the correct bulbs by lighting position, so you can replace the right lamp without guessing. Because the Sebring was offered in different body styles and trim levels, the exact bulb used for a given light can vary between the sedan and convertible, and some equipment may differ by market.
Use this page as a quick reference for common exterior and interior bulbs on the 2010 Chrysler Sebring. You will find fitment details for headlights, parking lights, brake lights, turn signals, license plate lights, dome lights, map lights, and other locations, making it easier to match the bulb to the correct socket before you buy.
For best results, confirm the trim, body style, and lighting package on your Sebring before ordering replacement bulbs. Halogen bulbs and LED upgrades are not always direct swaps, especially for exterior lamps where beam pattern, brightness, and warning messages can matter. If you are considering an aftermarket LED conversion, check whether the bulb base, polarity, and housing clearance are compatible, and compare the installed bulb to the listing before purchase. When possible, remove the old bulb and verify the number printed on the base so you can avoid fitment mistakes caused by year-to-year or sedan-versus-convertible differences.
FAQ
What is the high beam headlight bulb size for a 2010 Chrysler Sebring?
The high beam headlight bulb listed for the 2010 Chrysler Sebring is 9005.
Which bulb does the daytime running light use on this model?
The daytime running light bulb listed for the 2010 Chrysler Sebring is 3757A.
Are sedan and convertible rear bulbs the same on the 2010 Sebring?
No. Rear bulb fitment can differ by body style. For the sedan, the brake, tail, and rear turn signal bulbs are listed as 3157R. For the convertible, the brake and tail bulbs are listed as 3057R, and the rear turn signal bulb is listed as 3057.
What bulb size is used for the center high mount stop light?
The center high mount stop light bulb listed for the 2010 Chrysler Sebring is 921.
What are the front parking and side marker bulb sizes on the sedan?
On the sedan, the parking light, side marker light, and front turn signal light are all listed as 3757A.
What are the front parking and side marker bulb sizes on the convertible?
On the convertible, the parking light and side marker light are listed as 3457A.
What bulb is used for the front turn signal on the convertible?
The front turn signal light bulb listed for the 2010 Chrysler Sebring convertible is 3457A.
What bulb size fits the license plate light on the sedan?
The sedan license plate light bulb is listed as 168 or 917.
What bulb size fits the license plate light on the convertible?
The convertible license plate light bulb is listed as 2825 or 98.
What bulb is used for the glove box light?
The glove box light bulb listed for the 2010 Chrysler Sebring is 194 or 7441.
What bulb size is used for the dome light and courtesy light?
Both the dome light and courtesy light are listed as 578 bulbs on the 2010 Chrysler Sebring.
What bulb fits the trunk or cargo area light?
The trunk or cargo area light bulb listed for the 2010 Chrysler Sebring is 562.
What bulb is used for the back up reverse light?
The back up reverse light bulb listed for the 2010 Chrysler Sebring is 3157.
Should I check the installed bulb before ordering replacements?
Yes. Checking the installed bulb is the safest way to confirm fitment, especially on a 2010 Chrysler Sebring where trim and body style can change the bulb used in certain positions.