Chrysler Sebring 2008 Bulb Size
Bulb size chart
If you are looking for 2008 Chrysler Sebring bulb sizes, this page is designed to help you verify the correct bulb by lighting position. The Sebring could use different bulbs depending on trim, body style, and market, so it is best to match the bulb to the exact lamp location before buying replacements.
Use the chart on this page as a quick reference for common exterior and interior lights, including the high beam headlight, brake light, tail light, reverse light, license plate light, and cabin bulbs. Checking by position makes it easier to avoid ordering the wrong part and helps you compare the bulb already installed in your vehicle.
For fitment, always keep in mind that trim level, lighting package, and body style can change the bulb used on a 2008 Sebring. Some owners prefer halogen replacements that match the original look, while others choose LED upgrades for brighter output or longer life. If you are planning an aftermarket LED conversion, make sure the bulb shape, base, polarity, and housing clearance are compatible, since not every LED will fit or function correctly in every lamp. The safest approach is to check the bulb currently installed in your car before you purchase replacements, especially for exterior lights where small differences can affect fit and performance.
FAQ
What bulb does the 2008 Chrysler Sebring use for the high beam headlight?
The listed high beam headlight bulb for the 2008 Chrysler Sebring is 9005. Always confirm the bulb in your specific vehicle, since lighting setups can vary by trim or market.
What is the center high mount stop light bulb size on a 2008 Sebring?
The center high mount stop light bulb is 921 on this page. This is the bulb used for the upper brake light area on the rear of the vehicle.
Which bulb fits the license plate light on a 2008 Chrysler Sebring?
The license plate light may use 168 or 917, depending on the exact setup. Because both are listed, it is a good idea to check the bulb already installed before ordering.
What bulb is used for the glove box light?
The glove box light bulb is listed as 194 or 7441. Either may be used depending on the specific lamp assembly in your Sebring.
What bulb fits the trunk or cargo area light?
The trunk or cargo area light uses bulb 562. This same bulb is also listed for the courtesy light on this page.
What bulb does the dome light use in the 2008 Sebring?
The dome light bulb is 578. If your car has a different interior lighting package, it is still wise to verify the installed bulb before replacing it.
What bulb is used for the map lights?
The map light bulb is also 578. That means the dome light and map light may share the same bulb type on this model.
What is the reverse light bulb size for this car?
The back up reverse light bulb is 3157. If you are replacing both sides, compare the old bulb condition and socket fit before installation.
What bulb fits the brake light and tail light?
Both the brake light and tail light are listed as 3057R. This shared bulb type is common on rear lamp assemblies, but you should still confirm the exact bulb in your vehicle.
What are the front side marker, daytime running light, and front parking light bulb sizes?
The front side marker light bulb is 194NA. The daytime running light bulb is 3757A, and the front parking light bulb is 3457A.
What bulb is used for the rear turn signal on a 2008 Chrysler Sebring?
The rear turn signal light bulb is 3757A. This is the same bulb size listed for the daytime running light on this page.
What bulb is used for the front turn signal on a 2008 Sebring?
The front turn signal light bulb is 3457A. In some vehicles, the parking light also uses 3457A, so it is important to match the exact lamp position.
Why should I check my installed bulb before buying replacements?
Because the 2008 Chrysler Sebring can vary by trim, body style, and lighting package, the bulb in your car may not match every listing. Checking the installed bulb helps avoid fitment mistakes and makes replacement easier.
Can I switch the original bulbs to LED on my Sebring?
Yes, many owners upgrade to LED, but fitment is not always plug-and-play. You should confirm bulb size, base type, polarity, and available space in the housing before buying LED replacements.