Used for: Headlight Bulb High Beam, Headlight Bulb Low Beam
Used for: Back Up Reverse Light Bulb, Center High Mount Stop Light Bulb, Turn Signal Light Bulb Front, Turn Signal Light Bulb Rear
Used for: Brake Light Bulb, Tail Light Bulb Outer
Used for: License Plate Light Bulb, Parking Light Bulb, Tail Light Bulb Inner, Trunk or Cargo Area Light
Used for: License Plate Light Bulb, Parking Light Bulb, Tail Light Bulb Inner, Trunk or Cargo Area Light
Used for: Side Marker Light Bulb Front, Side Marker Light Bulb Rear
Used for: Ash Tray Light Bulb(Compare to original - Option 1), Automatic Transmission Indicator Light Bulb, Instrument Panel Light Bulb
Used for: Ash Tray Light Bulb(Compare to original - Option 2)
Used for: Courtesy Light Bulb
Used for: Dome Light Bulb, Map Light Bulb
Used for: Dome Light Bulb, Map Light Bulb
This 2000 Honda Prelude bulb size guide is designed to help you verify the correct bulbs by lighting position, so you can match the right part before you buy. Because the Prelude could vary by trim, market, and lighting package, checking each location separately is the safest way to confirm fitment for your specific car.
Use this page as a quick reference for exterior and interior lighting on the 2000 Prelude, including headlights, tail lamps, turn signals, license plate lights, and cabin bulbs. The bulb chart below groups each light by its position, which makes replacement easier and helps reduce mistakes when shopping for stock-style or upgraded bulbs.
For best results, compare the bulb already installed in your car before ordering, especially if your Prelude has a trim difference, an automatic transmission, or an aftermarket lighting change. Halogen bulbs and LED replacements may not use the same fitment or beam pattern, and some LED conversions can require extra parts or may not work well in every housing. If your car has been modified, or if the original bulb markings are hard to read, removing the bulb and matching it by base type is the most reliable step before purchase.
Both the high beam and low beam headlight bulbs are listed as H1 for the 2000 Honda Prelude. Always confirm the bulb in your specific headlamp housing before replacing both sides.
The front turn signal light bulb is 7440. This same bulb size is also listed for the rear turn signal and backup reverse light positions on this page.
The brake light bulb is 7443R. The outer tail light bulb is also listed as 7443R, so it is important to match the exact lighting position when replacing bulbs.
The center high mount stop light bulb is 7440. If your brake light assembly has been changed or repaired, confirm the socket style before ordering.
The license plate light bulb is listed as 168 or 917. Either size may appear depending on the exact application and market variation.
Both the dome light and map light use 2825 or 98 bulbs on this 2000 Honda Prelude. These are common interior bulb sizes, but it is still smart to verify the installed bulb if the car has been modified.
The front side marker light bulb and rear side marker light bulb are both listed as 168NA. This is a position-specific fitment, so use the side marker location rather than the tail lamp listing.
The parking light bulb is 168 or 917. This bulb size is shared with several other small exterior and interior positions on the page.
The back up reverse light bulb is 7440. If the reverse lights are dim or not working, check both the bulb and the socket condition.
The instrument panel light bulb is 2721. The automatic transmission indicator light and ash tray light option 1 are also listed as 2721.
The courtesy light bulb is DE3022. This is a separate fitment from the dome and map lights, so do not assume they are interchangeable.
Yes, many owners replace halogen bulbs with LED equivalents, but fitment and light output can vary by housing. Check beam pattern, polarity, and space behind the bulb, especially for headlights and turn signals.
