
PIAA 19615 9005 (HB3) Xtreme White Plus
$64.57
Buy on Amazon →
Used for: Headlight Bulb High Beam
Used for: Back Up Reverse Light Bulb, Turn Signal Light Bulb Front
Used for: Brake Light Bulb, Tail Light Bulb
Used for: Center High Mount Stop Light Bulb
Used for: License Plate Light Bulb
Used for: License Plate Light Bulb
Used for: Parking Light Bulb, Map Light Bulb
Used for: Parking Light Bulb, Map Light Bulb
Used for: Side Marker Light Bulb Front, Side Marker Light Bulb Rear
Used for: Turn Signal Light Bulb Rear
Used for: Ash Tray Light Bulb(Compare to original - Option 1), Automatic Transmission Indicator Light Bulb, Instrument Panel Light Bulb
Used for: Ash Tray Light Bulb(Compare to original - Option 2)
Used for: Courtesy Light Bulb, Dome Light Bulb
Used for: Trunk or Cargo Area Light
This page helps you verify the bulb sizes for a 1993 Honda Prelude by lighting position, so you can match the correct bulb to the correct socket before you buy. Because trim and lighting packages can vary by market and body style, it is always smart to confirm the exact lamp location on your car before ordering replacements.
For the 1993 Honda Prelude, the available bulb chart covers exterior, interior, and dash lighting such as the high beam headlight, front and rear turn signals, brake and tail lights, license plate lights, dome and courtesy lights, and instrument panel bulbs. Using the position-based list makes it easier to find the right fit without guessing from a generic bulb size chart.
Fitment can differ between trims, optional packages, and regional versions of the 1993 Prelude, so use this page as a guide rather than the only source of truth. If you are switching from halogen to LED, check polarity, bulb depth, and whether the housing has enough room for the new bulb or any built-in resistor. Aftermarket conversions can also change light output and warning behavior, especially in signal and brake circuits. Before you purchase anything, remove the installed bulb and compare the base, shape, and markings to the listing so you know the replacement will fit correctly.
The high beam headlight bulb listed for the 1993 Honda Prelude is 9005.
The center high mount stop light bulb is 921.
Both the parking light and map light positions list 168 and 917 as available bulb sizes.
The license plate light bulb is listed as 194 or 7441.
Both the front side marker light and rear side marker light use 168NA.
The dome light bulb and courtesy light bulb are both DE3175.
Both the automatic transmission indicator light and the instrument panel light use 2721.
Two ash tray bulb options are listed: 2721 for one version and 74 for the compare-to-original option.
The front turn signal light bulb and the back up reverse light bulb are both listed as 1156.
The trunk or cargo area light uses DE3021.
The rear turn signal light bulb is 3497, and both the brake light bulb and tail light bulb are listed as 3496.
Checking the installed bulb helps confirm the base type and size, which is useful because trim, market, and lighting package differences can affect fitment on a 1993 Honda Prelude.
Often yes, but you should verify fitment, polarity, and clearance first. Some LED replacements may also need additional components to work correctly in signal or brake light positions.
It covers the bulb positions and sizes listed for this page, but some vehicles may have optional or market-specific lighting differences. Always compare your car’s actual bulb to the chart.