
PIAA 19615 9005 (HB3) Xtreme White Plus
$64.57
Buy on Amazon →
Used for: Headlight Bulb High Beam
Used for: Back Up Reverse Light Bulb
Used for: Brake Light Bulb, Tail Light Bulb
Used for: Center High Mount Stop Light Bulb
Used for: License Plate Light Bulb
Used for: License Plate Light Bulb
Used for: Parking Light Bulb, Map Light Bulb
Used for: Parking Light Bulb, Map Light Bulb
Used for: Side Marker Light Bulb Front, Side Marker Light Bulb Rear
Used for: Turn Signal Light Bulb Front
Used for: Turn Signal Light Bulb Rear
Used for: Ash Tray Light Bulb(Compare to original - Option 1), Automatic Transmission Indicator Light Bulb, Instrument Panel Light Bulb
Used for: Ash Tray Light Bulb(Compare to original - Option 2)
Used for: Courtesy Light Bulb, Dome Light Bulb
Used for: Trunk or Cargo Area Light
This page covers bulb sizes for the 1994 Honda Prelude and is organized by lighting position so you can quickly verify the correct replacement for each lamp. Whether you are changing a headlight, interior bulb, or rear signal light, matching the bulb to the exact location helps avoid buying the wrong part.
Because trim and lighting packages can vary by market and body style, the bulb chart for this Prelude should be used as a fitment guide rather than a guess. Check the position on the car first, then compare it with the listed bulb size before ordering replacements.
For the best fit, confirm whether your Prelude uses standard halogen bulbs or an aftermarket LED conversion, since LED replacements may need different bases, polarity, or resistors to work correctly. Some cars also have trim-specific differences in interior and exterior lighting, so it is smart to compare the installed bulb with the chart before purchase. If a previous owner has modified the lighting, the original bulb size may not match what is currently in the socket, especially for common swap points like map lights, license plate lights, and turn signals.
The high beam bulb size listed for the 1994 Honda Prelude is 9005.
The center high mount stop light bulb is 921.
The front parking light uses 168 or 917, depending on the exact setup.
The map light bulb is listed as 168 or 917.
The license plate light bulb is 194 or 7441.
Both the front side marker light and rear side marker light use 168NA.
Both the dome light and courtesy light use DE3175.
The front turn signal light bulb is 7440.
The back up reverse light bulb is 1156.
The rear turn signal bulb is 3497, and both the brake light and tail light use 3496.
Yes. The trunk or cargo area light uses DE3021.
Yes. One ash tray bulb listing compares to original Option 1 and uses 2721, while Option 2 uses 74.
Because trim differences, market differences, and past repairs can change what is actually in the car. Checking the installed bulb helps confirm the correct base and size before you order.
Often yes, but LED replacements may require the right fit, polarity, or extra hardware to work properly. It is important to match the socket and test the bulb after installation.
It is a helpful reference, but not every car is identical. Lighting package differences by market and body style can affect fitment, so always verify the bulb location and the installed part.