
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam and Low Beam
Used for: Back Up Reverse Light Bulb
Used for: License Plate Light Bulb, Parking Light Bulb, Courtesy Light Bulb, Interior Door Light Bulb
Used for: License Plate Light Bulb, Parking Light Bulb, Courtesy Light Bulb, Interior Door Light Bulb
Used for: Side Marker Light Bulb Front
Used for: Turn Signal Light Bulb Front
Used for: Turn Signal Light Bulb Rear
Used for: Dome Light Bulb, Map Light Bulb
Used for: Dome Light Bulb, Map Light Bulb
Used for: Trunk or Cargo Area Light
This page helps you verify the correct bulb sizes for the 2014 Infiniti Q60 by lighting position, so you can replace the right lamp without guesswork. Whether you are changing a headlight, a turn signal, or an interior bulb, matching the bulb to the exact location is the safest way to avoid fitment mistakes.
The 2014 Infiniti Q60 uses a mix of LED and replaceable halogen-style bulbs depending on the lamp position. Because trim level, lighting package, market, and body style can affect the setup, it is a good idea to confirm the bulb type on your specific vehicle before ordering parts.
For best results, compare the bulb listed for each position with the bulb currently installed in your car, especially if your Q60 has been modified or uses an optional lighting package. Some exterior lights are factory LED units, while others use serviceable bulbs such as 921, 168/917, 194/7441, 7440A, 168NA, 7440, H11 LED, H16 LED, 158, and D2S depending on the location. If you are considering an aftermarket LED conversion, make sure the bulb base, physical size, polarity, and beam pattern are compatible with the housing. A bulb that fits electrically may still perform poorly if it is not designed for the reflector or projector. Checking the installed bulb before purchase is the most reliable way to confirm fitment on the 2014 Infiniti Q60.
It helps you identify the correct bulb type by lighting position, such as headlights, brake lights, reverse lights, license plate lights, and interior lamps. That makes it easier to replace the right bulb the first time.
No. Some positions use factory LED lighting, including the center high mount stop light, brake light, tail light, and rear side marker light. Other positions use replaceable bulbs such as 921, 168/917, 7440A, 7440, and D2S.
The back up reverse light bulb is 921.
The license plate light bulb is 168 or 917.
The front turn signal light bulb is 7440A.
The rear turn signal light bulb is 7440.
The front side marker light bulb is 168NA.
The front fog light bulb can be H11 LED or H16 LED, depending on the specific setup.
The high beam and low beam headlight bulb is D2S.
Yes. Both the dome light and map light use 194 or 7441.
The trunk or cargo area light bulb is 158.
Trim level, lighting package, market, and body style can change the bulb setup. That is why it is important to verify the bulb in your specific vehicle before buying replacements.
Usually no, not without modifying the housing or wiring. Factory LED units are typically built as complete assemblies, so you should match the original design rather than assuming a direct bulb swap.
Yes. Checking the installed bulb is the best way to confirm fitment, especially if your vehicle has been changed with aftermarket parts or if you are unsure about the original equipment.