
WLJH White LED 2721 37 74 Light Bulb
$11.99
Buy on Amazon →
Used for: Glove Box Light Bulb
Used for: Interior Door Light Bulb
Used for: Interior Door Light Bulb
Used for: Trunk or Cargo Area Light
This page covers the 2019 Infiniti Q60 and helps you verify bulb sizes by lighting position. Whether you are replacing a headlight, a license plate lamp, or an interior bulb, the goal is to match the correct bulb to the correct location before you buy.
The 2019 Q60 uses LED lighting for many exterior positions, and the exact setup can vary by trim, package, market, and body style. Use the bulb chart on this page to narrow down the fitment for each light so you can replace only what your vehicle actually uses.
For the best fitment results, always compare your trim and lighting package with the bulb chart before ordering. Some 2019 Infiniti Q60 models may use different lighting hardware depending on market or factory equipment, and LED assemblies are often not serviced the same way as halogen bulbs. If your car has been modified with aftermarket LED conversions, the bulb listed for the original equipment may not match what is currently installed. When possible, check the bulb already in the vehicle, confirm the connector style, and inspect the housing before purchase so you avoid returns and compatibility issues.
The 2019 Infiniti Q60 low beam is listed as LED on this page. Because headlight setups can vary by trim and market, confirm the exact headlamp assembly on your vehicle before ordering a replacement.
The high beam headlight is listed as LED for the 2019 Infiniti Q60. Some chart entries combine high beam and low beam information, so it is important to match the bulb position to the correct headlamp function.
Yes, the front fog light bulb is listed as LED. If your Q60 is equipped with front fog lights, verify the housing and connector style before replacing the lamp.
Yes, the brake light bulb is listed as LED. On many LED-equipped vehicles, the light may be part of a larger lamp assembly rather than a simple replaceable bulb.
The rear turn signal light bulb is listed as LED. Check whether your vehicle has a serviceable bulb or a sealed LED module before buying parts.
The front turn signal light bulb is listed as LED. Since trim and lighting package differences can affect fitment, confirm the exact front lamp assembly on your car.
The license plate light bulb is listed as LED. This is typically a small exterior lamp, but the housing design can still vary by market or package.
The back up reverse light bulb is listed as LED. If the reverse lamp is not working, inspect the full lamp unit and wiring as well as the bulb or module.
The interior door light bulb is listed as 168 or 917. These are the bulb numbers shown for that position, so compare the installed bulb before purchasing.
The glove box light bulb is listed as 2721. This is a small interior bulb, and it is a good idea to verify the old bulb number before ordering.
The trunk or cargo area light is listed as 158. If your Q60 has this lamp position, confirm the bulb shape and base against the existing part.
Some owners consider aftermarket LED conversions, but fitment depends on the housing, connector, and vehicle electronics. For the best result, check whether your Q60 was originally equipped with LED lighting and verify compatibility before converting.