
WLJH White LED 2721 37 74 Light Bulb
$11.99
Buy on Amazon →
Used for: Glove Box Light Bulb(Compare to original - Option 1)
Used for: Glove Box Light Bulb(Compare to original - Option 2)
Used for: Interior Door Light Bulb
Used for: Interior Door Light Bulb
Used for: Trunk or Cargo Area Light
This page helps you verify bulb sizes for the 2018 Infiniti Q60 by lighting position, so you can match the correct bulb to the exact lamp on the car. Because fitment can vary by trim, lighting package, market, and body style, it is smart to confirm the location first and then compare the bulb type listed for that position.
For the 2018 Infiniti Q60, many exterior lighting positions are listed as LED, including the headlights, fog lights, daytime running lights, brake lights, turn signals, side markers, tail lights, license plate lights, and reverse lights. Interior and cargo-area bulbs may use different bulb numbers, so checking each lamp separately is the best way to avoid ordering the wrong part.
When replacing bulbs on a 2018 Infiniti Q60, always check whether your car uses factory LED lighting or a replaceable bulb in that position, since some trims and packages differ. If you are comparing halogen to LED or planning an aftermarket conversion, make sure the new bulb or assembly is compatible with the housing, connector, and any built-in electronics. It is also a good idea to inspect the installed bulb before buying, especially for interior locations like the dome, map, glove box, trunk, and door lights, because those can use different sizes depending on equipment and market.
The chart shows LED for the headlight positions on the 2018 Infiniti Q60, including high beam, low beam, and the combined high beam and low beam entry. Because the page is organized by lighting position, check the exact headlight row that matches your vehicle.
Yes. The front fog light bulb position is listed as LED for this model year.
The daytime running light bulb position is listed as LED. That means the DRL setup on the 2018 Infiniti Q60 is shown as an LED application in the bulb chart.
The brake light bulb position is listed as LED. If you are replacing a brake light issue, confirm whether you are dealing with the lamp assembly or a separate serviceable bulb before ordering.
Both front turn signal light and rear turn signal light positions are listed as LED on the 2018 Infiniti Q60. Always verify the exact position, since front and rear fitment can differ on other vehicles.
The license plate light bulb position is listed as LED. This is one of the easier exterior lighting positions to identify because it is usually a small dedicated lamp near the rear plate area.
Yes. The tail light bulb positions and both front and rear side marker light positions are listed as LED for this model year.
The back-up reverse light bulb position is listed as LED. If the reverse lights are not working, check whether the issue is the LED light source, the housing, or the vehicle’s electrical system.
The dome light bulb and map light bulb positions are listed as LED. Interior lighting can vary by trim and package, so it is still worth checking the installed lamp before purchase.
The interior door light bulb is listed as 168 or 917. The glove box light is shown with two comparison options, 2721 and 74, and the trunk or cargo area light is listed as 158.
Because the 2018 Infiniti Q60 can vary by market, body style, and lighting package, not every car uses the same exact setup. The page is meant to help you narrow down the correct bulb by position, but the installed part should still be confirmed on the vehicle.
Yes. Checking the installed bulb is the safest way to confirm fitment, especially for interior lights and any location where the chart shows multiple possibilities or where the vehicle may have been modified.