
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam and Low Beam
Used for: Back Up Reverse Light Bulb
Used for: Brake Light Bulb, Tail Light Bulb Lower
Used for: Center High Mount Stop Light Bulb, License Plate Light Bulb
Used for: Center High Mount Stop Light Bulb, License Plate Light Bulb
Used for: Parking Light Bulb
Used for: Side Marker Light Bulb Front
Used for: Tail Light Bulb Upper
Used for: Turn Signal Light Bulb Front Inner
Used for: Turn Signal Light Bulb Front Outer
Used for: Turn Signal Light Bulb Rear
Used for: Map Light Bulb
Used for: Map Light Bulb
Used for: Trunk or Cargo Area Light
The 2010 Lincoln Navigator uses several different bulb types depending on the lighting position, so the easiest way to shop is by matching the bulb to the exact location on the vehicle. This page is designed to help you verify bulb sizes by lighting position, whether you are replacing a headlight, a license plate light, a cargo lamp, or a rear signal bulb.
Because the Navigator was offered with different trims and lighting setups, the correct bulb can vary by market and body style. Use the position-specific bulb chart below to confirm the right fit before you buy, especially for exterior lights that may look similar but use different bases or wattage requirements.
For best results, compare the bulb already installed in your 2010 Lincoln Navigator before ordering, especially if the vehicle has been modified or fitted with aftermarket lighting. Some positions may use halogen bulbs, while others may be converted to LED by a previous owner, and that can affect fitment and light output. If you are considering LED replacements, make sure the bulb style matches the socket and that the conversion is appropriate for the housing and lens. Trim level, package options, and regional differences can also change the bulb used in a given location, so a quick visual check of the old bulb is often the safest way to avoid a return.
The headlight bulb listed for both high beam and low beam on this page is D3S. Always confirm the installed bulb before purchase, since headlamp systems can vary by configuration.
The front fog light bulb listing shows H11 LED or H16 LED. That means the exact fit can depend on the lighting setup, so check the existing bulb and housing before ordering.
The front parking light bulb listed for the 2010 Lincoln Navigator is 3157.
The front inner turn signal bulb is listed as 3157A, while the front outer turn signal bulb is listed as 906NA. These are different positions and should not be mixed up.
The rear turn signal bulb listed for this vehicle is 4057.
The brake light bulb listed is 4057R. This is a separate rear lighting position from the turn signal and tail light bulbs.
The upper tail light bulb is listed as 906, and the lower tail light bulb is listed as 4057R. Check which section of the tail lamp you are replacing before buying.
The front side marker light bulb listed for this year is 194NA.
The back up reverse light bulb listed is 921.
The center high mount stop light bulb is listed as 168 or 917. Either may appear depending on the exact lamp design.
The license plate light bulb is listed as 168 or 917, depending on the specific lamp assembly.
The map light bulb is listed as 2825 or 98, and the trunk or cargo area light bulb is listed as 578.
Yes. Trim, lighting package, market, and body style can all affect the bulb used in a specific position, so it is best to verify the installed bulb before ordering.
Use the bulb type that matches your housing and your goals. Halogen-style replacements are usually the simplest direct fit, while LED conversions may need additional attention to beam pattern, polarity, and compatibility.