
PIAA 15223 H3 Xtreme White Plus
$67.15
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam, Headlight Bulb Low Beam
Used for: Headlight Bulb High Beam and Low Beam
Used for: Back Up Reverse Light Bulb
Used for: Brake Light Bulb, Tail Light Bulb
Used for: Center High Mount Stop Light Bulb, Courtesy Light Bulb(Compare to original - Option 2)
Used for: Center High Mount Stop Light Bulb, Courtesy Light Bulb(Compare to original - Option 2)
Used for: Cornering Light Bulb
Used for: Daytime Running Light Bulb
Used for: License Plate Light Bulb
Used for: License Plate Light Bulb
Used for: Parking Light Bulb, Turn Signal Light Bulb Front
Used for: Side Marker Light Bulb Rear
Used for: Turn Signal Light Bulb Rear
Used for: Courtesy Light Bulb(Compare to original - Option 1)
Used for: Courtesy Light Bulb(Compare to original - Option 1)
Used for: Dome Light Bulb
Used for: Glove Box Light Bulb, Trunk or Cargo Area Light
Used for: Map Light Bulb
This 2006 Nissan Maxima bulb size page helps you verify the correct bulbs by lighting position, so you can match the right part before you buy. Whether you are replacing a headlight, tail light, map light, or license plate lamp, checking the bulb chart by location is the easiest way to avoid guesswork.
The 2006 Maxima uses several different bulb types depending on the lamp position, and some fitment can vary by trim, market, or body style. Use the listings here to compare the bulb size for each exterior and interior light on your car, including common service items like the low beam, high beam, brake light, and dome light.
For best fitment, always compare the bulb in your vehicle with the chart before ordering, especially if your Maxima has an optional lighting package or has been modified. Halogen and LED replacements are not always direct swaps, and some aftermarket conversions may need extra components or may not fit the housing correctly. If you are unsure, remove the installed bulb and check the base style and markings before purchase. That is especially important on this model because some positions use different bulb families depending on trim and equipment.
The low beam headlight bulb listed for the 2006 Nissan Maxima is 9012. Some versions may also be shown with D2S for a high beam and low beam setup, so check your headlamp type before ordering.
The high beam headlight bulb listed is 9012. As with the low beam, some fitment can vary by lighting package, so confirm the bulb type in your vehicle.
The front turn signal light bulb is 1157A. This same bulb size is also listed for the parking light on this model.
The parking light bulb is 1157A. If you are replacing both front signal and parking lights, it is smart to verify the socket and bulb markings first.
The rear turn signal light bulb is 3057. This is separate from the brake and tail light bulb, which is listed as 3057R.
The brake light bulb is 3057R on the 2006 Nissan Maxima. The tail light bulb is also 3057R, so check the lamp function carefully when replacing bulbs.
The back up reverse light bulb is 912. If your reverse lights are dim or out, replacing both sides at the same time can help keep lighting even.
The dome light bulb is DE3175. This is an interior bulb, so make sure the replacement matches the length and base style before installation.
The map light bulb is DE3021, and the glove box light bulb is 158. The trunk or cargo area light also uses 158.
The license plate light bulb sizes listed are 168 and 917. Either may apply depending on the exact lamp setup, so verify the bulb currently installed in your Maxima.
The front fog light bulb is listed as H3C or H3. If your car has fog lights, check the housing and connector before buying replacements.
No. The cornering light bulb is 3156, while the daytime running light bulb is 1156. These are different bulb types and should not be mixed up.
Trim level, market, body style, and lighting package can all affect fitment. If your Maxima has been changed with aftermarket parts or LED conversions, the installed bulb may not match the original factory listing.