
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam, Headlight Bulb Low Beam
Used for: Headlight Bulb High Beam and Low Beam
Used for: Back Up Reverse Light Bulb
Used for: Brake Light Bulb, Tail Light Bulb
Used for: Center High Mount Stop Light Bulb, License Plate Light Bulb
Used for: Center High Mount Stop Light Bulb, License Plate Light Bulb
Used for: Cornering Light Bulb, Daytime Running Light Bulb
Used for: Parking Light Bulb, Turn Signal Light Bulb Front
Used for: Side Marker Light Bulb Rear
Used for: Side Marker Light Bulb Rear
Used for: Turn Signal Light Bulb Rear
Used for: Courtesy Light Bulb
Used for: Courtesy Light Bulb
Used for: Dome Light Bulb
Used for: Glove Box Light Bulb, Interior Door Light Bulb, Trunk or Cargo Area Light
Used for: Map Light Bulb
This page helps you find the correct bulb sizes for the 2008 Nissan Maxima by lighting position, so you can match the right bulb before you buy. Whether you are replacing a headlight, interior lamp, or rear signal bulb, checking the bulb chart by location is the easiest way to avoid ordering the wrong part.
The 2008 Nissan Maxima uses different bulb types depending on the lamp location, and some positions may vary by trim, market, or lighting package. Use the bulb list on this page as a fitment guide for common exterior and interior lights, including headlights, fog lights, brake lights, license plate lights, and cabin bulbs.
For best results, compare the chart with the bulb already installed in your car before purchasing. Trim and package differences can affect fitment, especially on vehicles with optional lighting equipment or factory HID setups. If you are switching from halogen to LED, make sure the replacement bulb matches the socket and has enough clearance inside the housing. Aftermarket conversions can also change beam pattern or trigger fitment issues, so it is smart to verify the installed bulb and confirm compatibility before ordering.
The chart lists 9005 for both the high beam and low beam positions on some setups. It also shows D2S for the combined high beam and low beam headlight bulb on certain versions, so check your installed bulb and headlamp type before buying.
Not always. Some listings show 9005 for both beams, while other lighting packages use D2S for the headlight bulb. The correct fit depends on the trim and headlight configuration.
The front fog light bulb is listed as H11 LED or H16 LED. If your car has factory fog lights, confirm the socket style and housing before choosing an LED replacement.
The brake light bulb is 3057R. This is a rear lamp fitment used for the stop lamp function on the 2008 Maxima.
The tail light bulb is also listed as 3057R. On many vehicles, the tail and brake functions are separate, so it is important to match the exact rear lamp position.
The rear turn signal bulb is 3057. This is different from the brake and tail bulb listing, so do not assume the rear signal uses the same bulb as the stop light.
Both the front turn signal light and the parking light are listed as 4157NA. That makes it easier to replace either front lamp with the correct bulb type.
The back up reverse light bulb is 912. If one reverse lamp is out, it is usually best to replace both sides at the same time.
The daytime running light bulb is 3156. The same bulb size is also listed for the cornering light on this model.
The dome light bulb is DE3175. This is a common interior bulb size, but it is still a good idea to compare the old bulb before ordering.
The map light bulb is DE3021. If your overhead console has more than one lamp, check each position because some interior bulbs can differ.
The license plate light bulb is listed as 168 or 917. Either size may appear depending on the exact lamp assembly and market version.
Several interior locations use different bulbs. The courtesy light is listed as 194 or 7441, while the glove box light, trunk or cargo area light, and interior door light are listed as 158.
Yes. Trim, lighting package, body style, and market can all affect bulb fitment. Always verify the bulb in your specific vehicle before purchasing replacements.