
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam
Used for: Headlight Bulb Low Beam(with halogen headlights)
Used for: Headlight Bulb Low Beam(with HID headlights)
Used for: Back Up Reverse Light Bulb
Used for: License Plate Light Bulb
Used for: License Plate Light Bulb
Used for: Parking Light Bulb, Turn Signal Light Bulb Front
Used for: Side Marker Light Bulb Front
Used for: Side Marker Light Bulb Rear
Used for: Stepwell Light Bulb, Glove Box Light Bulb, Trunk or Cargo Area Light
Used for: Turn Signal Light Bulb Rear
Used for: Dome Light Bulb, Interior Door Light Bulb, Map Light Bulb
Used for: Dome Light Bulb, Interior Door Light Bulb, Map Light Bulb
This 2010 Nissan Maxima bulb size guide helps you verify the correct bulbs by lighting position, so you can match the right replacement before you buy. Whether you are changing a headlight, brake light, interior bulb, or license plate lamp, this page is organized to make fitment checks quick and simple.
The 2010 Maxima uses a mix of halogen, HID, and LED lighting depending on trim and equipment. That means the bulb size can change based on where the bulb is located and how the car was equipped from the factory, so it is important to confirm the exact position on your vehicle before ordering replacements.
Fitment can vary by trim, lighting package, market, and body style, so always compare the bulb listed here with the bulb already installed in your car. The 2010 Nissan Maxima may use halogen low beams on some models and D2S HID low beams on others, while fog light setups can also differ. If you are upgrading to LED or using an aftermarket conversion, make sure the bulb base, connector, and housing depth all match, since a bulb can fit physically but still not work correctly. When possible, check the old bulb before purchase to avoid mistakes and to confirm whether your vehicle has the standard factory setup or a previous owner’s modification.
Low beam fitment depends on the headlight type. Models with halogen headlights use H11 low beam bulbs, while models with HID headlights use D2S low beam bulbs.
The high beam headlight bulb is 9005.
Front fog light fitment can vary, but the listed options are H11 LED or H16 LED depending on the setup.
The back up reverse light bulb is 921.
The front turn signal light bulb is 3457A.
The rear turn signal light bulb is 7440A.
The front parking light bulb is 3457A.
The front side marker light bulb is 2827.
The rear side marker light bulb is 168NA.
The license plate light bulb sizes are 168 and 917.
The dome light, map light, and interior door light all use 194 or 7441 bulbs.
The glove box light, trunk or cargo area light, and stepwell light all use 158 bulbs.
Yes, the listed brake light bulb, tail light bulb, and center high mount stop light bulb are LED on this page.
Because trim level, lighting package, and previous repairs can change the bulb type. Checking the installed bulb helps confirm the exact fitment and avoids ordering the wrong part.