
PIAA 19615 9005 (HB3) Xtreme White Plus
$64.57
Buy on Amazon →
Used for: Headlight Bulb High Beam
Used for: Headlight Bulb High Beam and Low Beam
Used for: Headlight Bulb Low Beam
Used for: Back Up Reverse Light Bulb
Used for: License Plate Light Bulb
Used for: License Plate Light Bulb
Used for: Parking Light Bulb(with halogen headlights), Turn Signal Light Bulb Front(with halogen headlights)
Used for: Parking Light Bulb(with HID headlights), Side Marker Light Bulb Front(with HID headlights)
Used for: Side Marker Light Bulb Front(with halogen headlights), Side Marker Light Bulb Rear
Used for: Side Marker Light Bulb Front(with halogen headlights), Side Marker Light Bulb Rear
Used for: Turn Signal Light Bulb Front(with HID headlights)
Used for: Turn Signal Light Bulb Rear
Used for: Dome Light Bulb, Trunk or Cargo Area Light
Used for: Glove Box Light Bulb
This page for the 2010 Nissan Murano helps you verify bulb sizes by lighting position, so you can match the right replacement before you buy. Whether you are changing a headlight, tail light, interior lamp, or license plate bulb, the correct fit depends on where the bulb is used on the vehicle.
The 2010 Murano can use different bulb types depending on trim, headlight package, and market. That means the same model year may have different sizes for halogen and HID setups, so checking the lighting position on this page is the safest way to confirm the correct bulb before replacement.
For best fitment, compare your vehicle’s trim and lighting package with the bulb chart before ordering. Halogen and HID versions do not always use the same bulbs, and some exterior positions may change with optional equipment or regional differences. If you are upgrading to LED, make sure the replacement is compatible with the socket, polarity, and any built-in load requirements, especially for turn signals and parking lights. Aftermarket conversions can also affect beam pattern and warning messages, so it is smart to check the installed bulb first and confirm the exact base and shape before purchase.
The low beam headlight bulb is H11 on halogen-equipped models. Murano versions with HID headlights use D2S for the headlight bulb setup.
The high beam bulb size is 9005 on the listed setup. If your Murano has HID headlights, the headlight system may use D2S instead of separate halogen high and low beam bulbs.
Front turn signal bulbs for halogen headlights use 1157A.
Front turn signal bulbs for HID headlights use 7440A.
The rear turn signal bulb is 7440.
The back up reverse light bulb size is 921.
The license plate light uses 168 or 917, depending on the exact lamp setup.
Both the dome light and the trunk or cargo area light use DE3175.
The glove box light bulb is 158.
Rear side marker lights use 2825 or 98. Front side marker lights use 2825 or 98 on halogen models, and 2827 on HID models.
Yes. The center high mount stop light, brake light, and tail light are listed as LED on this page.
Because trim, package, and market differences can change the bulb used in a given position. Checking the installed bulb helps confirm the exact fit before you buy, especially when choosing between halogen, HID, or LED replacements.