
PIAA 19615 9005 (HB3) Xtreme White Plus
$64.57
Buy on Amazon →
Used for: Headlight Bulb High Beam
Used for: Headlight Bulb High Beam and Low Beam
Used for: Headlight Bulb Low Beam
Used for: Back Up Reverse Light Bulb
Used for: License Plate Light Bulb
Used for: License Plate Light Bulb
Used for: Parking Light Bulb(with halogen headlights), Turn Signal Light Bulb Front(with halogen headlights)
Used for: Parking Light Bulb(with HID headlights), Side Marker Light Bulb Front
Used for: Side Marker Light Bulb Rear
Used for: Turn Signal Light Bulb Front(with HID headlights), Turn Signal Light Bulb Rear(Sport Utility)
Used for: Turn Signal Light Bulb Rear(Convertible)
Used for: Courtesy Light Bulb
Used for: Dome Light Bulb, Map Light Bulb
Used for: Dome Light Bulb, Map Light Bulb
Used for: Glove Box Light Bulb
Used for: Trunk or Cargo Area Light(Convertible)
Used for: Trunk or Cargo Area Light(Convertible)
Used for: Trunk or Cargo Area Light(Sport Utility)
This 2012 Nissan Murano bulb size guide helps you verify the correct bulbs by lighting position, so you can match the right part before you buy. Whether you are replacing a headlight, brake light, reverse light, or interior lamp, the fitment can depend on the exact lamp location and the vehicle’s lighting package.
The 2012 Murano was offered with different trim and headlight setups, so the bulb type can change between halogen and HID-equipped models. Use the bulb chart for this year to narrow down the correct size for each exterior and interior light on your Murano, including front, rear, cargo, and cabin locations.
For the best fit, always confirm your trim, package, and body style before ordering bulbs, since lighting equipment can vary by market and configuration. The 2012 Murano may use different bulbs for halogen versus HID headlights, and some exterior positions also change with package content or model variation. If you are converting to aftermarket LED bulbs, check that the bulb base, polarity, and physical clearance match the housing, and remember that some LED upgrades may need resistors or compatible drivers to avoid warning lights or fast flashing. Before purchasing, it is smart to remove the installed bulb and compare the base type and markings, because the bulb currently in the vehicle is the most reliable reference when fitment is uncertain.
Most 2012 Nissan Murano models with standard halogen headlights use H11 low beam bulbs. If your Murano has HID headlights, the low beam setup is different and uses D2S for the headlight bulb type.
The high beam bulb listed for the 2012 Murano is 9005. On HID-equipped versions, the headlight setup is different, so it is important to confirm which lighting package your vehicle has before ordering.
The back up reverse light bulb for the 2012 Nissan Murano is 921. This is the bulb size to check for rear reverse lamp replacement on this model year.
The license plate light bulb sizes listed for the 2012 Murano are 168 and 917. Either size may apply depending on the exact lamp assembly, so verify the installed bulb before buying.
Both the dome light and map light use 194 or 7441 bulbs on the 2012 Murano. These interior bulbs are common across many vehicles, but it is still best to confirm the base in your specific lamp.
For 2012 Murano models with halogen headlights, the front turn signal light bulb is 1157A. This differs from the HID-equipped front turn signal setup, so headlight package matters.
For 2012 Murano models with HID headlights, the front turn signal light bulb is 7440A. This is one of the key differences between halogen and HID lighting configurations on this vehicle.
The rear turn signal light bulb for the Sport Utility body style is 7440A. If you are replacing a rear signal lamp, confirm the body style because the Convertible uses a different bulb.
Yes. The rear turn signal light bulb for the Convertible is 7440, while the Sport Utility version uses 7440A. Body style is important here, so match the bulb to the exact vehicle configuration.
The front side marker light bulb for the 2012 Nissan Murano is 2827. This applies to the front marker position listed for this model year.
The rear side marker light bulb is 168NA on the 2012 Murano. This is the bulb size to check for the rear side marker position.
The glove box light bulb is 158, and the courtesy light bulb is 161 on the 2012 Murano. These are interior convenience lights, so it helps to verify the exact socket before ordering replacements.
Check the exact lighting position, trim, and whether your Murano has halogen or HID headlights. Also compare the installed bulb’s base and size, because aftermarket LED replacements must physically fit the housing and may require additional compatibility steps.