
PIAA 19615 9005 (HB3) Xtreme White Plus
$64.57
Buy on Amazon →
Used for: Headlight Bulb High Beam
Used for: Headlight Bulb Low Beam(with projector-type headlights)
Used for: Headlight Bulb Low Beam(without projector-type headlights)
Used for: Back Up Reverse Light Bulb (with projector-type headlights)
Used for: Back Up Reverse Light Bulb (without projector-type headlights), Center High Mount Stop Light Bulb, Trunk or Cargo Area Light
Used for: Brake Light Bulb(without projector-type headlights)
Used for: License Plate Light Bulb, Glove Box Light Bulb
Used for: License Plate Light Bulb, Glove Box Light Bulb
Used for: Parking Light Bulb(without projector-type headlights), Side Marker Light Bulb Front(without projector-type headlights), Turn Signal Light Bulb Front(without projector-type headlights)
Used for: Side Marker Light Bulb Rear(without projector-type headlights)
Used for: Tail Light Bulb(without projector-type headlights)
Used for: Turn Signal Light Bulb Rear(without projector-type headlights)
Used for: Engine Compartment Light Bulb
Used for: Map Light Bulb
This 2013 RAM 3500 bulb size guide helps you verify the correct replacement bulb by lighting position, so you can match the right part before you buy. Because trim and lighting equipment can vary by market and body style, it is important to check the exact lamp location on your truck and compare it with the bulb chart for this page.
Use this page to identify common exterior and interior bulb sizes for the 2013 RAM 3500, including headlight, tail light, brake light, turn signal, reverse, license plate, map light, glove box, and cargo-area bulbs. The chart is organized by position to make replacement easier and to reduce the chance of ordering the wrong bulb type.
Fitment can differ between projector and non-projector headlight setups, as well as between halogen and LED lighting packages, so always confirm which configuration your 2013 RAM 3500 has before ordering. If your truck has been converted to aftermarket LEDs, the bulb may physically fit but still need a compatible socket, resistor, or decoder to avoid warning messages or fast flashing. The safest approach is to compare the installed bulb with the listing on this page, then verify the base style and any package-specific notes before purchase.
For 2013 RAM 3500 models without projector-type headlights, the low beam bulb is H11. For models with projector-type headlights, the low beam bulb is 9012.
The high beam bulb listed for the 2013 RAM 3500 is 9005.
Without projector-type headlights, the front turn signal bulb is 3157A.
Without projector-type headlights, the front parking light bulb is 3157A.
Without projector-type headlights, the rear turn signal bulb is 3157.
Without projector-type headlights, the rear tail light bulb is 3057R.
Without projector-type headlights, the brake light bulb is 3157R.
With projector-type headlights, the back up reverse light bulb is 7440.
Without projector-type headlights, the back up reverse light bulb is 921.
The center high mount stop light bulb is 921.
The license plate light bulb is listed as 194 or 7441.
The map light bulb is 578.
The glove box light bulb is listed as 194 or 7441.
Yes. The low beam and several front or rear lamp positions can differ depending on whether the truck has projector-type headlights, so it is important to match the exact lighting setup.
Yes. Checking the installed bulb is the best way to confirm fitment, especially if your truck has an optional lighting package, a previous owner changed bulbs, or the vehicle uses aftermarket LED conversions.