
PIAA 19615 9005 (HB3) Xtreme White Plus
$64.57
Buy on Amazon →
Used for: Headlight Bulb High Beam, Headlight Bulb Low Beam(with projector-type headlights)
Used for: Headlight Bulb Low Beam(without projector-type headlights)
Used for: Back Up Reverse Light Bulb (with projector-type headlights)
Used for: Back Up Reverse Light Bulb (without projector-type headlights), Center High Mount Stop Light Bulb, Trunk or Cargo Area Light
Used for: Brake Light Bulb(without projector-type headlights)
Used for: License Plate Light Bulb, Glove Box Light Bulb
Used for: License Plate Light Bulb, Glove Box Light Bulb
Used for: Parking Light Bulb(without projector-type headlights), Side Marker Light Bulb Front(without projector-type headlights), Turn Signal Light Bulb Front(without projector-type headlights)
Used for: Side Marker Light Bulb Rear(without projector-type headlights)
Used for: Tail Light Bulb(without projector-type headlights)
Used for: Turn Signal Light Bulb Rear(without projector-type headlights)
Used for: Engine Compartment Light Bulb
Used for: Map Light Bulb
This page for the 2019 RAM 3500 helps you verify bulb sizes by lighting position, so you can match the right replacement to the right lamp. Because trim level, lighting package, market, and body style can change the setup, it is important to check the specific position before ordering any bulb.
Use the bulb chart below to compare the headlight, tail light, brake light, turn signal, reverse light, and interior bulb locations on your truck. For the 2019 RAM 3500, some positions use LED units while others use standard bulb sizes such as 9005, H11, 921, 194/7441, 3157A, 3157R, 3057R, 3057, 3057A, 7440, 578, and 561 depending on configuration.
Fitment on the 2019 RAM 3500 can vary by trim and lighting package, so always confirm whether your truck has projector-type headlights or non-projector headlights before buying. That matters because some positions use different bulb sizes depending on the front lighting design, and LED-equipped lamps may not use a replaceable bulb in the same way as halogen units. If you are considering an aftermarket LED conversion, check for proper beam pattern, polarity, and any required resistors or adapters to avoid warning lights or poor light output. The safest approach is to inspect the installed bulb or compare the old part number before purchase, especially for exterior lights that may differ by cab style, bed setup, or market.
It helps you match the correct bulb size to each lighting position on the truck, such as headlights, brake lights, turn signals, reverse lights, and interior lamps.
For projector-type headlights, the low beam bulb is 9005 on this page.
Without projector-type headlights, the low beam bulb is H11.
The high beam bulb listed for the 2019 RAM 3500 is 9005.
The center high mount stop light bulb is 921.
It depends on the headlight setup. With projector-type headlights, the back up reverse light bulb is 7440. Without projector-type headlights, it is 921.
The license plate light bulb sizes listed are 194 and 7441.
The glove box light uses 194 or 7441, and the map light uses 578.
No. With projector-type headlights, those positions are LED. Without projector-type headlights, the front turn signal, parking light, and front side marker use 3157A.
Without projector-type headlights, the rear turn signal bulb is 3057, the tail light bulb is 3157R, and the rear side marker bulb is 3057A.
With projector-type headlights, the rear turn signal, tail light, brake light, and side marker positions are listed as LED on this page.
Yes. Several positions are listed as LED, including the stepwell light and multiple exterior lamps on trucks with projector-type headlights.
The engine compartment light bulb is 561, and it is marked optional in the bulb list.
Because trim and lighting package differences can change the bulb type, and checking the installed bulb helps confirm the exact fit before you buy.