
PIAA 15223 H3 Xtreme White Plus
$67.15
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam and Low Beam
Used for: Back Up Reverse Light Bulb
Used for: Brake Light Bulb, Tail Light Bulb
Used for: Center High Mount Stop Light Bulb
Used for: License Plate Light Bulb, Parking Light Bulb, Trunk or Cargo Area Light
Used for: License Plate Light Bulb, Parking Light Bulb, Trunk or Cargo Area Light
Used for: Side Marker Light Bulb Front
Used for: Turn Signal Light Bulb Front, Turn Signal Light Bulb Rear
Used for: Ash Tray Light Bulb(Compare to original - Option 1)
Used for: Ash Tray Light Bulb(Compare to original - Option 2)
Used for: Dome Light Bulb, Map Light Bulb
This page covers the 2004 Subaru Forester and helps you verify bulb sizes by lighting position, so you can match the right replacement to the right socket. Because Subaru used different lighting packages in some markets and trims, it is smart to confirm the exact lamp location before ordering.
For the 2004 Forester, the chart below includes common exterior and interior bulbs such as headlights, turn signals, brake lights, dome lights, map lights, and license plate lights. Use it as a fitment guide when replacing a burned-out bulb or upgrading to a different type of lamp.
Fitment can vary by trim, body style, and market, so always compare the bulb in your vehicle before buying, especially if your Forester has factory fog lights or an uncommon interior setup. Halogen bulbs are the safest direct replacement for most positions, while LED upgrades may require checking polarity, beam pattern, and whether the lamp housing is designed for LED use. Aftermarket conversions can change brightness and color, but they may also affect glare or warning behavior, so confirm compatibility before installing them. If a bulb number is listed with more than one option, or if your old bulb is faded or unreadable, remove the installed bulb and match it physically before purchase.
The 2004 Subaru Forester uses a 9003 bulb for both the high beam and low beam headlight positions.
The front turn signal light bulb is 7440A on the 2004 Subaru Forester.
The rear turn signal light bulb is also 7440A for the 2004 Subaru Forester.
Both the brake light and tail light use 7443R on the 2004 Forester.
The center high mount stop light bulb is 912.
The back up reverse light bulb is 921.
The license plate light bulb is listed as 168 or 917.
The parking light bulb is listed as 168 or 917.
The front side marker light bulb is 168NA.
Both the dome light and map light use DE3175 bulbs.
The trunk or cargo area light uses 168 or 917.
The front fog light bulb listing is H3C or H3, but fog light fitment can depend on trim and package, so check the installed bulb before ordering.
Some 2004 Subaru Forester models were built with different lighting packages depending on market or trim, which can affect bulb fitment in certain positions.
Yes, in many positions you can use LED replacements, but you should check fit, polarity, beam pattern, and whether the housing is suitable for LED use.
Remove the bulb and compare its shape and base to the chart before buying a replacement, especially for interior and fog light positions.